LTC2480IDD#TRPBF Overview
The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 10-WFDFN Exposed Pad package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 10 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 10 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 7.5 Hz.The input type of this electronic AD converter is Differential.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-ADC.The architecture that analogue to digital converter's core adopts is Sigma-Delta.There are 10 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).It belongs to LTC2480 family.It is possible to categorize the supply type according to Single.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.Surface Mount is a device that can be mounted on the digital converter.The ADC converter operates with the maximal supply voltage of 5.5V.It operates with the minimal supply voltage of 2.7V.The ADC converter operates from 3/5V power supplies.Temperature Sensor can be ensured when operating.The ADC converter consists of 1 elements.
LTC2480IDD#TRPBF Features
1 Functions
10 basic kinds of terminations
10 pin count
Minimal supply voltage of 2.7V
3/5V power supplies
1 elements

LTC2480IDD#TRPBF Applications
There are a lot of Linear Technology/Analog Devices
LTC2480IDD#TRPBF ADC applications.

Digital signal processing
Scientific instruments
Rotary encoder
Displaying
Transducer
Microcontrollers.
Digital Storage Oscilloscope
Scientific instruments.
Music reproduction technology
Communication Systems

Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Factory Lead Time	14 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-WFDFN Exposed Pad
Number of Pins	10
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Published	2014
JESD-609 Code	e3
Feature	Temperature Sensor
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Terminal Position	DUAL
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	LTC2480
Pin Count	10
Qualification Status	Not Qualified
Number of Elements	1
Polarity	Bipolar
Power Supplies	3/5V
Configuration	MUX-ADC
Interface	SPI, Serial
Max Supply Voltage	5.5V
Min Supply Voltage	2.7V
Number of Bits	16
Input Type	Differential
Architecture	Sigma-Delta
Converter Type	ADC, DELTA-SIGMA
Supply Type	Single
Reference Type	External
Data Interface	SPI
Resolution	2 B
Sampling Rate	7.5 sps
Voltage - Supply, Analog	2.7V~5.5V
Voltage - Supply, Digital	2.7V~5.5V
Number of Analog In Channels	1
Sampling Rate (Per Second)	7.5
Output Bit Code	BINARY
Length	3mm
Height Seated (Max)	0.8mm
Width	3mm
RoHS Status	ROHS3 Compliant