M4A3-256/128-10YI Overview256 macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.A 208-BFQFP package contains the item.This device has 128 I/O ports programmed into it.It is programmed that device terminations will be 208 .The terminal position of this electrical component is QUAD.A voltage of 3.3V is used as the power supply for this device.It is recommended to package the chip by Tray.During operation, the operating temperature is kept at -40°C~85°C TA to ensure its reliability.Mount the chip by Surface Mount.This type of FPGA is a part of the ispMACH® 4A series.Chips are programmed with 208 pins.If this device is used, you will also be able to find YES.There are related parts in M4A3-256.In digital circuits, there are 10000 gates, which act as a basic building block.If high efficiency is to be achieved, the supply voltage should be maintained at 3.3V.Data storage is performed using EEPROM.In this case, Surface Mount is used to mount the electronic component.The 208 pins are designed into the board.A voltage of 3.6V is the maximum supply voltage for this device.A minimum supply voltage of 3V is required for this device to operate.A total of 145programmable I/Os are available.Ideally, the maximal frequency should be lower than 100MHz Hz.To detect input signals, there are 14 dedicated inputs.
M4A3-256/128-10YI Features208-BFQFP package
128 I/Os
The operating temperature of -40°C~85°C TA
208 pin count
208 pins
M4A3-256/128-10YI ApplicationsThere are a lot of Lattice Semiconductor Corporation
M4A3-256/128-10YI CPLDs applications.
Address decoders
Custom state machines
Digital systems
Portable digital devices
Handheld digital devices
Battery operated portable devices
Complex programmable logic devices
Digital designs
Field programmable gate
Address decoding
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Number of Pins | 208 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | ispMACH® 4A |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | M4A3-256 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 128 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 10000 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 145 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 14 |
| Voltage Supply - Internal | 3V~3.6V |
| Length | 28mm |
| Height Seated (Max) | 4.1mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A3-256/128-10YI Datasheet
+8613715157867