M4A5-32/32-7JC Overview 32 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is enclosed in a 44-LCC (J-Lead) package.The device is programmed with 32 I/O ports.It is programmed to terminate devices at 44.There is a QUAD terminal position on the electrical part in question.The device is powered by a voltage of 5V volts.It is recommended that the chip be packaged by Tube.Ensure its reliability by operating at 0°C~70°C TA.It is recommended to mount the chip by Surface Mount.FPGAs belonging to the ispMACH® 4A series contain this type of chip.With 44 pins programmed, the chip is ready to use.When using this device, YES is also available.You can find its related parts in the M4A5-32.1250 gates are used to construct digital circuits.If high efficiency is desired, the supply voltage should be kept at 5V.It is recommended that data be stored in EEPROM.In this case, it is mounted by Surface Mount.The pins are 44.This device operates at a voltage of 5.25V when the maximum supply voltage is applied.With a minimal supply voltage of 4.75V, it operates.A power supply of 5V volts is required to operate this device.Currently, there are 516 Programmable I/Os available.It is important to make sure that the maximum frequency is less than 125MHz.
M4A5-32/32-7JC Features44-LCC (J-Lead) package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
44 pins
5V power supplies
M4A5-32/32-7JC ApplicationsThere are a lot of Lattice Semiconductor Corporation
M4A5-32/32-7JC CPLDs applications.
Digital systems
Portable digital devices
Handheld digital devices
Battery operated portable devices
Complex programmable logic devices
Digital designs
Field programmable gate
Address decoding
D/T registers and latches
Synchronous or asynchronous mode
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | ispMACH® 4A |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-32 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 1250 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 516 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Length | 16.5862mm |
| Height Seated (Max) | 4.572mm |
| Width | 16.5862mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A5-32/32-7JC Datasheet
+8613715157867