MAX308MJE Overview
The packaging of the product is made up of Tube.Embedded in the CDIP package, it is cost-effective.It operates at a voltage of 15V.There is a nominal negative supply voltage of -15V.A 16 termination is used to prevent signals from reflecting off the end of the transmission line.Known for its high quality and superior performance, it is a type of 16-pin electronic component.Electronic devices should be operated at a maximum temperature of 125°C.Electronic devices should be operated at a minimum temperature of -55°C.The component with the lowest tolerance for high temperatures determines the reflow temperature limit of 240.It is ideally suited to the operating supply voltage of 500μA.Dual supply voltages should be higher than 5V.Dual supply voltages should be lower than 20V.The SINGLE-ENDED MULTIPLEXER IC functions as an analog IC.The device is capable of operating from a supply voltage of 28V.At 30V, the maximum supply voltage is limited.Normal operation requires a minimum supply voltage of 5V.There are 1 channels configured on it.The device is equipped with 16 pins.
MAX308MJE Features
Supplied in the CDIP package
Operating supply current of 500μA
Operating supply voltage of 28V

MAX308MJE Applications
There are a lot of Maxim Integrated
MAX308MJE Analog Multipliers & Dividers applications.

Inverse/same-phase proportional circuit
Addition and subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator and differentiator circuits
Logarithmic and exponential operation circuits
Multiplication and division circuits
Precision measurement
Power control
Information processing
Weak signal detection

Package / Case	CDIP
Surface Mount	NO
Number of Pins	16
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	175Ohm
Terminal Finish	Tin/Lead (Sn/Pb)
Max Operating Temperature	125°C
Min Operating Temperature	-55°C
Max Power Dissipation	800mW
Terminal Position	DUAL
Terminal Form	THROUGH-HOLE
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	2.54mm
Time@Peak Reflow Temperature-Max (s)	20
Pin Count	16
Operating Supply Voltage	28V
Temperature Grade	MILITARY
Number of Channels	1
Max Supply Voltage	30V
Min Supply Voltage	5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	500μA
Propagation Delay	175 ns
Turn On Delay Time	600 ns
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	300 ns
Max Dual Supply Voltage	20V
Min Dual Supply Voltage	5V
Off-state Isolation-Nom	75 dB
On-state Resistance Match-Nom	1.5Ohm
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.03A
Height Seated (Max)	5.08mm
Width	7.62mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Mounting Type	Through Hole
Package / Case	16-CDIP (0.300, 7.62mm)
Supplier Device Package	16-CDIP
Mounting Style	PCB Mount
Qualification	AEC-Q200
Case Code - in	2512
Case Code - mm	6432
Unit Weight	0.001429 oz
Factory Pack Quantity:Factory Pack Quantity	1000
Manufacturer	TT Electronics
Brand	Welwyn Components / TT Electronics
Package	Tube
Base Product Number	MAX308
Mfr	Analog Devices Inc./Maxim Integrated
Channel-to-Channel Matching (ΔRon)	1.5Ohm
Product Status	Active
Series	LR
Packaging	Reel
Operating Temperature	-55°C ~ 125°C (TA)
Termination	2 Terminal
Subcategory	Resistors
Technology	Thick Film
Termination Style	SMD/SMT
Number of Circuits	1
Application	Current Sense
Product Type	Current Sense Resistors
-3db Bandwidth	-
On-State Resistance (Max)	100Ohm
Multiplexer/Demultiplexer Circuit	8:1
Current - Leakage (IS(off)) (Max)	750pA
Channel Capacitance (CS(off), CD(off))	3pF, 26pF
Switch Circuit	-
Switch Time (Ton, Toff) (Max)	150ns, 150ns
Charge Injection	2pC
Crosstalk	-92dB @ 100kHz
Voltage - Supply, Single (V+)	5V ~ 30V
Voltage - Supply, Dual (V±)	±5V ~ 20V
Features	-
Product Category	Current Sense Resistors - SMD
Width	3.2 mm
Height	0.74 mm
Length	6.3 mm