MAX3638ETM+ Overview
In it, there are 48 terminations. Clock program provides 3.3V volts. Clock program contains a total of CLOCK GENERATOR, OTHER peripheral ICs, uPs, and uCs. The device contains 1. In normaloperation, the maximum frequency is 800MHz. Of the part, there are 2010 publications. Surface Mount is recommended for mounting. With 48 pins, the device is designed. Minimum working temperature for this device must not be less than -40°C. Under 85°C degrees Celsius, the operating temperature should be maintained. You should maintain a voltage of 3.3V for the supply. Voltage 3.6V is used for this part. Circuits application is necessary for the device to have a supply voltage greater than 3V.
MAX3638ETM+ Features
uPs/uCs/Peripheral ICs Type of CLOCK GENERATOR, OTHER
Include 1 Circuits
with 48 Pins
operate supply voltage at the range of 3.3V

MAX3638ETM+ Applications
There are a lot of Microsemi
MAX3638ETM+ application specific timer applications.

Routers
Ethernet switch/router
PCI Express 2.0/3.0
Broadcast video/audio timing
Processor and FPGA clocking
Any-frequency clock conversion
MSAN/DSLAM/PON
Fibre Channel, SAN
Telecom line cards
1 GbE and 10 GbE

Factory Lead Time	10 Weeks
Mount	Surface Mount
Number of Pins	48
Published	2010
Part Status	Discontinued
Number of Terminations	48
ECCN Code	EAR99
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Terminal Position	QUAD
Supply Voltage	3.3V
Terminal Pitch	0.5mm
Operating Supply Voltage	3.3V
Temperature Grade	INDUSTRIAL
Number of Circuits	1
Max Supply Voltage	3.6V
Min Supply Voltage	3V
uPs/uCs/Peripheral ICs Type	CLOCK GENERATOR, OTHER
Frequency (Max)	800MHz
Input	Crystal
Primary Clock/Crystal Frequency-Nom	25MHz
PLL	Yes
Length	7mm
Height Seated (Max)	0.8mm
Width	7mm
Radiation Hardening	No
RoHS Status	RoHS Compliant