MAX4519CEE+T OverviewThe packaging of this product consists of Tape & Reel (TR).Due to its cost-effectiveness, the QSOP package contains it.Powered by 5V voltage, it operates at a constant current.A nominal negative supply voltage of -5V is provided.Various terminations, such as 16 terminations, prevent signals from reflecting off the end of the transmission line.As a result, the reflow temperature limit of 260 is determined by the component with the lowest tolerance for high temperatures.There should be a higher voltage on the dual supply than on 2.7V.If the dual supply voltage is lower than 8V, then it is recommended.In its analog IC form, DIFFERENTIAL MULTIPLEXER performs as an integrated circuit.Maximum operating temperatures are permitted to reach 70°C.It is possible to limit the maximum voltage of the supply at 15V.In order to maintain normal operation, the minimum supply voltage is set at 2.7V.A 2 channel configuration has been selected.With 16 pins, it is equipped.
MAX4519CEE+T FeaturesSupplied in the QSOP package
MAX4519CEE+T ApplicationsThere are a lot of Maxim Integrated
MAX4519CEE+T Analog Multipliers & Dividers applications.
Logarithmic and exponential operation circuits
Multiplication and division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video and image computer boards
Package / Case | QSOP |
Surface Mount | YES |
Packaging | Tape & Reel (TR) |
Published | 1999 |
JESD-609 Code | e3 |
Pbfree Code | yes |
Part Status | Last Time Buy |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 16 |
Terminal Finish | TIN |
HTS Code | 8542.39.00.01 |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 1 |
Supply Voltage | 5V |
Terminal Pitch | 0.635mm |
Pin Count | 16 |
JESD-30 Code | R-PDSO-G16 |
Operating Temperature (Max) | 70°C |
Temperature Grade | COMMERCIAL |
Number of Channels | 2 |
Max Supply Voltage | 15V |
Min Supply Voltage | 2.7V |
Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
Neg Supply Voltage-Nom (Vsup) | -5V |
Max Dual Supply Voltage | 8V |
On-State Resistance (Max) | 100Ohm |
Min Dual Supply Voltage | 2.7V |
Off-state Isolation-Nom | 75 dB |
On-state Resistance Match-Nom | 4Ohm |
Switch-on Time-Max | 150ns |
Switch-off Time-Max | 150ns |
Length | 4.89mm |
Height Seated (Max) | 1.75mm |
Width | 3.9mm |
Radiation Hardening | No |
RoHS Status | RoHS Compliant |