MB88155PFT-G-113-JN-EFE1 OverviewAs a clock IC, PLLs is packaged using the Tape & Reel (TR) method. This clock generator is embedded in the 8-TSSOP (0.173, 4.40mm Width) package. 8 terminations can be found in frequency synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. Crystal is designed as this clock generator's input. 1 circuits are implemented to access the electronic component's full performance. This clock-based frequency generator provides a frequency up to 50MHz Max. This component can be conveniently installed on the panel thanks to the Surface Mount. Clock PLL works with 3V~3.6V supply voltage provided. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. This is a clock generator compatible with CMOS logic levels. This electronic component can be classified as a Fanout Buffer (Distribution), Spread Spectrum Clock Generator. Excessed supply current (higher than 7mA) may cause thermal destruction of an element.
MB88155PFT-G-113-JN-EFE1 FeaturesAvailable in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
MB88155PFT-G-113-JN-EFE1 ApplicationsThere are a lot of Cypress Semiconductor Corp
MB88155PFT-G-113-JN-EFE1 Clock Generators applications.
Instrument
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
Operating Temperature | -40°C~85°C |
Packaging | Tape & Reel (TR) |
Published | 2017 |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 8 |
ECCN Code | EAR99 |
Type | Fanout Buffer (Distribution), Spread Spectrum Clock Generator |
Voltage - Supply | 3V~3.6V |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Supply Voltage | 3.3V |
Terminal Pitch | 0.65mm |
Output | CMOS |
JESD-30 Code | R-PDSO-G8 |
Qualification Status | Not Qualified |
Power Supplies | 3.3V |
Number of Circuits | 1 |
Supply Current-Max | 7mA |
Frequency (Max) | 50MHz |
Input | Crystal |
Ratio - Input:Output | 1:2 |
Primary Clock/Crystal Frequency-Nom | 50MHz |
PLL | Yes with Bypass |
Differential - Input:Output | No/No |
Divider/Multiplier | No/Yes |
Length | 4.4mm |
RoHS Status | ROHS3 Compliant |