MC100H642FNR2G Overview
The Tape & Reel (TR) package provides access to it. An accompanying case is included. A mounting type of Surface Mount is recommended. There are 28 terminations in it. The part provides a voltage of 5V volts. The peak reflow temperature is used to run 260. 1 are present on the device. normaloperation has a maximum frequency of 100MHz. Temperatures can be varied in the 0°C~85°C range. Depending on the component, a voltage of 4.75V~5.25V can be supplied. This component primarily serves the purpose of 68030, 68040 MPUs. The output should be TTL. Currently, there are 2006 publications of the part. In order to find information about a part, you need to start at MC100H642. The Surface Mount mounting method is recommended. There are 28 pins on this device. The board has 28 pins. 5V should be the supply voltage. Circuits application uses a logic IC type of LOW SKEW CLOCK DRIVER.
MC100H642FNR2G Features
Mounting Type: Surface Mount
Peak Reflow Temperature (Cel): 260
Include 1 Circuits
run the output at th range of TTL
with 28 Pins
operate supply voltage at the range of 5V
Logic IC Type: LOW SKEW CLOCK DRIVER

MC100H642FNR2G Applications
There are a lot of ON Semiconductor
MC100H642FNR2G application specific timer applications.

Ethernet switch/router
PCI Express 2.0/3.0
Broadcast video/audio timing
Processor and FPGA clocking
Any-frequency clock conversion
MSAN/DSLAM/PON
Fibre Channel, SAN
Telecom line cards
1 GbE and 10 GbE
Servers, Storage, Search Acceleration

Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-LCC (J-Lead)
Number of Pins	28
Operating Temperature	0°C~85°C
Packaging	Tape & Reel (TR)
Published	2006
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	28
Terminal Finish	Tin (Sn)
Voltage - Supply	4.75V~5.25V
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MC100H642
Output	TTL
Pin Count	28
Operating Supply Voltage	5V
Power Supplies	5V
Number of Circuits	1
Frequency (Max)	100MHz
Halogen Free	Halogen Free
Input	ECL, TTL
Ratio - Input:Output	2:8
Logic IC Type	LOW SKEW CLOCK DRIVER
PLL	No
Differential - Input:Output	Yes/Yes
Propagation Delay (tpd)	5.75 ns
Main Purpose	68030, 68040 MPUs
Same Edge Skew-Max (tskwd)	0.5 ns
Height Seated (Max)	4.57mm
RoHS Status	RoHS Compliant
Lead Free	Lead Free
Surface Mount	YES
Pbfree Code	no
Terminal Finish	MATTE TIN
JESD-30 Code	S-PQCC-J28
Qualification Status	COMMERCIAL
Supply Voltage-Max (Vsup)	5.25V
Supply Voltage-Min (Vsup)	4.75V
RoHS Status	ROHS3 Compliant