MC10EP17DWR2 Overview
Tape & Reel (TR) is employed as a way of packaging.It is accessible to the 20-SOIC (0.295, 7.50mm Width) package.The voltage of 3V~5.5V is supplied to make sure that the device is able to operate normally.It is a type of electronic part mounted in the way of Surface Mount. -40°C~85°C is set as its operating temperature.The memory features a size of 4 bits to store information.The electronic parts belonging to the 10EP series offer a number of similarities.A number of related parts can be found on the basis of its base part number 10EP17.The number of all component pins adds up to 20.Signals are prevented from reflecting off the end of the transmission line through 20 terminations.It is mounted in the way of Surface Mount.There are 20 pins to form parts of its construction.The supply voltage of 5.5V works as an important factor for its operation.The power supplies of +-3.3/+-5V should be maintained for convenient use.It provides high performance in CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE.It uses LINE TRANSCEIVER as its interface IC type.
MC10EP17DWR2 Features

MC10EP17DWR2 Applications
There are a lot of ON Semiconductor
MC10EP17DWR2 Specialty Logic ICs applications.

Televisions
Cell phones
Wireless modems
Remote controls
Wireless network systems
Satellite communications networks
Ethernet circuitry
Wired telephone
Cordless telephone
Desktop PC

Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-SOIC (0.295, 7.50mm Width)
Number of Pins	20
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	10EP
Published	2008
JESD-609 Code	e0
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	20
ECCN Code	EAR99
Terminal Finish	Tin/Lead (Sn/Pb)
Additional Feature	CAN ALSO OPERATE WITH -3V TO -5.5V SUPPLY IN NECL MODE
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	3V~5.5V
Terminal Pitch	1.27mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	10EP17
Pin Count	20
Qualification Status	Not Qualified
Operating Supply Voltage	5.5V
Power Supplies	+-3.3/+-5V
Nominal Supply Current	68mA
Number of Bits	4
Logic Function	AND, Receiver
Data Rate	3 Tbps
Logic Type	Differential Receiver/Driver
Differential Output	YES
Interface IC Type	LINE TRANSCEIVER
Interface Standard	GENERAL PURPOSE
Receive Delay-Max	0.3 ns
Transmit Delay-Max	0.3 ns
Length	12.8mm
Height Seated (Max)	2.65mm
Width	7.5mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead