MC74HC4046ADTR2G OverviewCut Tape (CT)-method packaging is used for clock ICs. The 16-TSSOP (0.173, 4.40mm Width) package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 16 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 4.5V. The input of this clock generator is designed to be CMOS. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 13MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 6V. For safety reasons, this frequency synthesizer should have a voltage supply above 2V. As far as the supply voltage is concerned, clock PLL can be used with 3V~6V. Based on the test statistics, an ambient temperature of -55°C~125°C should be set. This electronic component is usually classified as a Phase Lock Loop (PLL) component. The clock-generating IC is a 16-bit device designed specifically for microprocessors. You can find related electrical components to the base part number MC74HC4046A. It is possible to connect to the frequency generators via 16 pins. The 74HC series includes this electronic part.
MC74HC4046ADTR2G FeaturesAvailable in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 4.5V
MC74HC4046ADTR2G ApplicationsThere are a lot of ON Semiconductor
MC74HC4046ADTR2G Clock Generators applications.
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| Published | 2005 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Phase Lock Loop (PLL) |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Voltage - Supply | 3V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MC74HC4046A |
| Pin Count | 16 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 1 |
| Frequency (Max) | 13MHz |
| Halogen Free | Halogen Free |
| Input | CMOS |
| Ratio - Input:Output | 1:4 |
| PLL | Yes |
| Divider/Multiplier | No/No |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74HC4046ADTR2G Datasheet
+8613715157867