MCIMX257DJM4AR2 OverviewPacked in 400-LFBGA, the microprocessor is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. The CPU has 1 Core 32-Bit cores/Bus width. Extended operating temperature around -20°C~70°C TA. It comes from the i.MX25 series. This CPU is cored with a ARM926EJ-S processor. This CPU uses LPDDR, DDR, DDR2 RAM controllers. To serve better this microprocessor features CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART interfaces. This CPU runs I/O at 2.0V 2.5V 2.7V 3.0V 3.3V. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR. There are 400 terminations totally. With a 1.45V voltage supply, the part should be turned on and run. It has a 32-Bit architecture. The supply voltage should not exceed 1.52V. This CPU has a wide external data Bus width of 16. The embedded microprocessor has a clock frequency of 24MHz. As specified in datasheets, the embedded microprocessor requires 1.2/1.51.8/3.3V power supplies.
MCIMX257DJM4AR2 FeaturesARM926EJ-S Core
32-Bit Structure
MCIMX257DJM4AR2 ApplicationsThere are a lot of NXP USA Inc.
MCIMX257DJM4AR2 Microprocessor applications.
Measurement and control field
Automatic control
Equipment control
Instrument control
Consumer electronics products
Toys
Robots
Radio
Television
Heater/Fan
| Factory Lead Time | 15 Weeks |
| Package / Case | 400-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -20°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | i.MX25 |
| Published | 2008 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 400 |
| ECCN Code | 5A992 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.45V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | S-PBGA-B400 |
| Supply Voltage-Max (Vsup) | 1.52V |
| Power Supplies | 1.2/1.51.8/3.3V |
| Supply Voltage-Min (Vsup) | 1.38V |
| Speed | 400MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Core Processor | ARM926EJ-S |
| Clock Frequency | 24MHz |
| Bit Size | 32 |
| Address Bus Width | 26 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 16 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 2.0V 2.5V 2.7V 3.0V 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, DDR, DDR2 |
| USB | USB 2.0 + PHY (2) |
| Additional Interfaces | CAN, I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART |
| Display & Interface Controllers | Keypad, LCD, Touchscreen |
| Length | 17mm |
| Height Seated (Max) | 1.6mm |
| RoHS Status | ROHS3 Compliant |