MCIMX280CVM4BR2 Overview
Packed in 289-LFBGA, the microprocessor is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. The CPU has 1 Core 32-Bit cores/Bus width. Extended operating temperature around -40°C~85°C TA. It comes from the i.MX28 series. This CPU is cored with a ARM926EJ-S processor. This CPU uses LVDDR, LVDDR2, DDR2 RAM controllers. To serve better this microprocessor features I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART interfaces. This CPU runs I/O at 1.8V 3.3V. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR, RISC. If you are looking for variants of the cpu microprocessor, try search with MCIMX280. There are 289 terminations totally. It has a 32-Bit architecture. The supply voltage should not exceed 1.55V. The embedded microprocessor has a clock frequency of 24MHz. As specified in datasheets, the embedded microprocessor requires 1.41.8V power supplies.
MCIMX280CVM4BR2 Features
ARM926EJ-S Core
32-Bit Structure

MCIMX280CVM4BR2 Applications
There are a lot of NXP USA Inc.
MCIMX280CVM4BR2 Microprocessor applications.

Measurement and control field
Automatic control
Equipment control
Instrument control
Consumer electronics products
Toys
Robots
Radio
Television
Heater/Fan

Factory Lead Time	15 Weeks
Package / Case	289-LFBGA
Surface Mount	YES
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Series	i.MX28
Published	2002
JESD-609 Code	e1
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	289
ECCN Code	5A992
Terminal Finish	Tin/Silver/Copper (Sn/Ag/Cu)
HTS Code	8542.31.00.01
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.8mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MCIMX280
JESD-30 Code	S-PBGA-B289
Supply Voltage-Max (Vsup)	1.55V
Power Supplies	1.41.8V
Supply Voltage-Min (Vsup)	1.35V
Speed	454MHz
uPs/uCs/Peripheral ICs Type	MICROPROCESSOR, RISC
Core Processor	ARM926EJ-S
Clock Frequency	24MHz
Bit Size	32
Boundary Scan	YES
Low Power Mode	YES
Format	FIXED POINT
Integrated Cache	YES
Voltage - I/O	1.8V 3.3V
Ethernet	10/100Mbps (1)
Number of Cores/Bus Width	1 Core 32-Bit
Graphics Acceleration	No
RAM Controllers	LVDDR, LVDDR2, DDR2
USB	USB 2.0 + PHY (2)
Additional Interfaces	I2C, I2S, MMC/SD/SDIO, SAI, SPI, SSI, SSP, UART
Co-Processors/DSP	Data; DCP
Security Features	Boot Security, Cryptography, Hardware ID
Display & Interface Controllers	Keypad
Length	14mm
Height Seated (Max)	1.37mm
RoHS Status	ROHS3 Compliant