Microchip's MCP6H01/2 family of operational amplifiers (op amps) has a wide supply voltage range of 3.5 V to 16 V and rail-to-rail output operation. This family is unity gain stable and has a gain bandwidth product of 1.2 MHz (typical). These devices operate with a single-supply voltage as high as 16 V, while only drawing 135 μA/amplifier (typical) of quiescent current. The MCP6H01/2 family is offered in single (MCP6H01) and dual (MCP6H02) configurations. All devices are fully specified in extended temperature range from -40°C to +125°C. Features: Input Offset Voltage: ±0.7 mV (Typical) Quiescent Current: 135 μA (Typical) Common Mode Rejection Ratio: 100 dB (Typical) Power Supply Rejection Ratio: 102 dB (Typical) Rail-to-Rail Output Supply Voltage Range: — Single-Supply Operation: 3.5 V to 16 V — Dual-Supply Operation: ±1.75 V to ±8 V Gain Bandwidth Product: 1.2 MHz (Typical) Slew Rate: 0.8 V/μs (Typical) Unity Gain Stable Extended Temperature Range: -40°C to +125°C No Phase Reversal

Amplifier Type	Precision
Common Mode Rejection Ratio	100 dB
Density Noise	35 nV/vHz
Dimensions	0.049\” (1.25mm) X 0.00 in W X 0.19 in L
Dimensions	4.90 x 3.90 x 1.25 ; Minimum mm
Gain Bandwidth	1.2 MHz
Height	0.049" (1.25mm) (Max.)
Input Bias Current	25 nA
Input Offset Current	+/-1 pA
Input Offset Voltage	3.5 mV
Input Voltage Range	-0.3 to 13.7 V
Length	0.192 in
Maximum Operating Temperature	+125 °C
Minimum Operating Temperature	-40 °C
Mounting Type	Surface Mount
Number of Channels per Chip	1
Number of Pins	8
Output Current	50 mA
Output Type	Rail to Rail
Package Type	SOIC
Slew Rate	0.8 V/μs
Temperature Operating Range	-40 to +125 °C
Type of Power Supply	Dual ; Single
Typical Dual Supply Voltage	±1.75 to ±8 V
Typical Single Supply Voltage	3.5 to 16 V
Voltage, Input, High Level	13.7 V
Voltage, Input, Low Level	-0.3 V
Width	0 in