MTCH105T-I/ST OverviewPackaging material from Tape & Reel (TR) is used. Mounting it on a PCB requires Surface Mount. 14-TSSOP (0.173, 4.40mm Width)'s low package cost is one of the factors that have made it so popular in the electronic industry. 2.05V~3.6V Supply Voltage is required for the device to operate normally. It is used to input values of Up to 5. As a standard grade, it falls into Type Buttons. You should always keep its operating temperature at -40°C~85°C. -- Series offers the best value due to its cost-down performance ratio. A supply current of 80mA is provided to this system. The part is ---resolution. Up to 5 channels are used by LED drivers. There is a 80mA setting for the device's supply current. It is constructed using 14 terminations. There is a MTCH105 component on the gadget that is the largest. An 3V volt supply powers the component at all times. Supply voltage, Vsup, must be greater than 2.05V. Supplier device package is 14-TSSOP. At Vsup, maximum Supply Voltage (3.6V) is reached. A reflow temperature peak is 260. 5 channels are used for data transmission. Specific uses are addressed by a 14 pin. 3.6 V voltage is needed for its operation. Sensors is the subcategory under which it can be classified.
MTCH105T-I/ST Features14-TSSOP (0.173, 4.40mm Width) package
Up to 5 LED driver channels
14 pins
Sensors subcategory
MTCH105T-I/ST ApplicationsThere are a lot of Microchip Technology
MTCH105T-I/ST Capacitive Sensors applications.
Rain I Fog I Ice I Snow Sensor
Material Size Detection
Material Stack Height
Level Sensor for Liquids, including Conductive ones such as Detergent, Soap, and Ink
Collision Avoidance
Rain, Fog, Ice, Snow Sensor
Automotive Door and Kick Sensors
Compact Capacitive Keyboards
Remote Control Trackpads
Appliances
| Factory Lead Time | 12 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Supplier Device Package | 14-TSSOP |
| Number of Terminals | 14 |
| Mounting Style | SMD/SMT |
| Supplier Package | TSSOP |
| Maximum Operating Temperature | + 125 C |
| Minimum Operating Temperature | - 40 C |
| Manufacturer | Microchip |
| Brand | Microchip Technology / Atmel |
| RoHS | Details |
| Package | Tape & Reel (TR);Cut Tape (CT);Digi-Reel®; |
| Base Product Number | MTCH105 |
| Mfr | Microchip Technology |
| Product Status | Active |
| Dimensions | 5 mm L x 4.4 mm W x 1.2 mm H |
| Package Shape | RECTANGULAR |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | -- |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Buttons |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.39.00.01 |
| Subcategory | Sensors |
| Voltage - Supply | 2.05V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MTCH105 |
| Pin Count | 14 |
| Termination Style | SMD/SMT |
| JESD-30 Code | R-PDSO-G14 |
| Operating Supply Voltage | 3.6 V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 2.05V |
| Number of Channels | 5 |
| Interface | Open Drain |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 80mA |
| Current - Supply | 80mA |
| Number of Inputs | Up to 5 |
| Seated Height-Max | 1.2 mm |
| Resolution | -- |
| Product Type | Touch Sensors |
| Sensor Type | Controller |
| Screening Level | TS 16949 |
| Proximity Detection | Yes |
| LED Driver Channels | Up to 5 |
| Product Category | Capacitive Touch Sensors |
| Length | 5mm |
| Height Seated (Max) | 1.2mm |
| Width | 4.4mm |
| Height | 1.2 mm |
| RoHS Status | ROHS3 Compliant |