NB2309AC1DT OverviewThe Tube method is used for packaging clock ICs. As part of the 16-TSSOP (0.173, 4.40mm Width) package, this clock generator is embedded. This clock generator ic can sustain NOT SPECIFIED degrees of temperature during reflowing. There are 16 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. In this clock generator, Clock is used as the input to the clock. For a full understanding of the electronic part's performance, 1 circuits are implemented. An up to 133.33MHz frequency is provided by this clock-based RF synthesizer. The Surface Mount allows the electrical component to be installed conveniently on the panel. 3.6V would be the maximum supply voltage for this clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. In terms of supply voltage, RF synthesizer works with 3V~3.6V. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. It has been classified as a Zero Delay Buffer electronic part, which means that it is a semiconductor. It is a 16-bit clock PLL designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number NB2309A. There are 16 pins on the frequency generators that are available for use. Supply voltage 3.3V is what clock generator can handle. Low timing skew is offered by this RF synthesizer at maximum 0.25 ns. The digital clock generator has 8 high-enable output pins.
NB2309AC1DT FeaturesAvailable in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
8 true outputs
NB2309AC1DT ApplicationsThere are a lot of ON Semiconductor
NB2309AC1DT Clock Generators applications.
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NB2309A |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Frequency (Max) | 133.33MHz |
| Output Characteristics | 3-STATE |
| Input | Clock |
| Ratio - Input:Output | 1:9 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 0.25 ns |
| Number of True Outputs | 8 |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NB2309AC1DT Datasheet
+8613715157867