NCD9830DBR2G Overview
The analogue to digital converter is designed with 8 Bits.The AD converter is embedded in the 16-TSSOP (0.173, 4.40mm Width) package.The ADC converter is packaged in the way of Tape & Reel (TR).The ADC converter is equipped with 1 Functions .There are 16 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The is equipped with 16 pin count.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~125°C.The number of samples of audio recorded every second is 70k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-ADC.The architecture that analogue to digital converter's core adopts is SAR.There are 16 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1 B, which is on a display or in a camera sensor (specifically in a digital image).This electrical digital converter is lead free, which means made without lead, or has no lead added to it.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.The ADC converter operates with the maximal supply voltage of 5.5V.It operates with the minimal supply voltage of 2.7V.The maximal analog input voltage of this electrical AD converter is 2.5V.The ADC converter operates from 2.7/5V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 5mW.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller.
NCD9830DBR2G Features
1 Functions
16 basic kinds of terminations
16 pin count
Minimal supply voltage of 2.7V
2.7/5V power supplies

NCD9830DBR2G Applications
There are a lot of ON Semiconductor
NCD9830DBR2G ADC applications.

Medical Instrumentation and medical imaging
Music recording
Digital signal processing
Scientific instruments
Rotary encoder
Displaying
Transducer
Microcontrollers.
Digital Storage Oscilloscope
Scientific instruments.

Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Factory Lead Time	4 Weeks
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Published	2006
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Terminal Pitch	0.635mm
Pin Count	16
Qualification Status	Not Qualified
Polarity	Unipolar
Power Supplies	2.7/5V
Configuration	MUX-ADC
Max Supply Voltage	5.5V
Min Supply Voltage	2.7V
Power Dissipation	5mW
Number of Bits	8
Input Type	Differential, Single Ended
Architecture	SAR
Halogen Free	Halogen Free
Converter Type	ADC, SUCCESSIVE APPROXIMATION
Reference Type	External, Internal
Data Interface	I2C
Resolution	1 B
Sampling Rate	70 ksps
Voltage - Supply, Analog	2.7V~5.5V
Voltage - Supply, Digital	2.7V~5.5V
Sampling Rate (Per Second)	70k
Output Bit Code	OFFSET BINARY
Integral Nonlinearity (INL)	0.5 LSB
Number of A/D Converters	1
Analog Input Voltage-Max	2.5V
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free