NCS2002SN1T1G OverviewThe linear amplifier is packaged in a SOT-23-6 Thin, TSOT-23-6 case. This is a General Purpose type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 6. Buffer amplifier has a total of 6 pins. Please take in mind that this instrumentation amplifier should be run at 2.5V. The buffer op amp includes 6 pins. Regarding input offset voltage, op amp rates 6mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~105°C. This op amp can operate from a supply current at 820μA. Voltage gain should remain at 92.04dB. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. This linear amplifier has a total of 1 elements. The operating supply voltage of the buffer op amp is rated at 3.5V. TAPE AND REEL is adopted to pack the instrumentation amplifier.
NCS2002SN1T1G Features6 Pins
supply voltage of 2.5V
92.04dB voltage gain
Output Type: Rail-to-Rail
NCS2002SN1T1G ApplicationsThere are a lot of ON Semiconductor
NCS2002SN1T1G Instrumentational OP Amps applications.
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Factory Lead Time | 10 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NC*2002 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3.5V |
| Number of Elements | 1 |
| Power Supplies | +-2.5V |
| Operating Supply Current | 820μA |
| Nominal Supply Current | 2μA |
| Power Dissipation | 340mW |
| Output Current | 86mA |
| Slew Rate | 1.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 0.9V~7V ±0.45V~3.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 128mA |
| Input Offset Voltage (Vos) | 6mV |
| Gain Bandwidth Product | 900kHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 900 kHz |
| Voltage Gain | 92.04dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | NO |
| Max Frequency | 100kHz |
| Programmable Power | NO |
| Wideband | NO |
| Height | 1mm |
| Length | 3.1mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCS2002SN1T1G Datasheet
+8613715157867