NCS2002SN2T1G OverviewPackaging for the buffer amplifier is in the form of a SOT-23-6 Thin, TSOT-23-6 case. A General Purpose-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 6 terminations have been reported in the past few weeks. Buffer amplifier has a total of 6 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.5V. An 6-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 6mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~105°C as far as operating temperature is concerned. Using a supply current of 820μA , this buffer op amp will be able to operate. Keeping the voltage gain at 92.04dB is the best course of action. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. A total of 1 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 3.5V. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps.
NCS2002SN2T1G Features6 Pins
supply voltage of 2.5V
92.04dB voltage gain
Output Type: Rail-to-Rail
NCS2002SN2T1G ApplicationsThere are a lot of ON Semiconductor
NCS2002SN2T1G Instrumentational OP Amps applications.
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Factory Lead Time | 4 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NC*2002 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3.5V |
| Number of Elements | 1 |
| Power Supplies | +-2.5V |
| Operating Supply Current | 820μA |
| Nominal Supply Current | 2μA |
| Power Dissipation | 340mW |
| Output Current | 86mA |
| Slew Rate | 1.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 10pA |
| Voltage - Supply, Single/Dual (±) | 0.9V~7V ±0.45V~3.5V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 128mA |
| Input Offset Voltage (Vos) | 6mV |
| Gain Bandwidth Product | 900kHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 900 kHz |
| Voltage Gain | 92.04dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Height | 1mm |
| Length | 3.1mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCS2002SN2T1G Datasheet
+8613715157867