NS16C2752TVSX/NOPB OverviewAlternatively, UART can be purchased in the cost-effective 48-TQFP package.Transmission is carried out over 2, DUART channels.Tape & Reel (TR) is adopted as the packaging option.Its uPs/uCs/Peripheral ICs use SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.The configuration uses 48 terminations.During operation, it receives a voltage of 3.3V.The status of this electronic part is currently Active.As a means of communicating data, there are 2 serial I/Os available.Surface Mount is the method for mounting it.In order for it to operate, a voltage of 2.97V~5.5V must be applied.This device is an integrated circuit with 48 pins.Its clock frequency is measured at 24MHz.In order for the equipment to work for a long period of time, it should not be allowed to reach a temperature above -40°C.UART is recommended that the operating temperature does not exceed 85°C to ensure long-term, normal performance.A configuration of the chip is determined by its 48 pins.A mounting method of Surface Mount is used.To ensure its high efficiency, a voltage of 5V is provided as the supply voltage.The base part number of the part is set to 16C2752.There is a maximum value for supply current that is 3mA.
NS16C2752TVSX/NOPB Features2 serial I/Os
Clock frequency of 24MHz
Operating supply voltage of 5V
NS16C2752TVSX/NOPB ApplicationsThere are a lot of Texas Instruments
NS16C2752TVSX/NOPB UARTs applications.
White goods
Battery Operated Electronics
Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Number of Pins | 48 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Voltage - Supply | 2.97V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 16C2752 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| Nominal Supply Current | 3mA |
| Max Supply Current | 3mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 24MHz |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Data Rate (Max) | 5Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.625 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 64 Byte |
| With Modem Control | Yes |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867