OP270GPZ OverviewIn the package, you will find a 8-DIP (0.300, 7.62mm)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 15V battery. The op amp ic has an array of 8 pins on it. Op amp rates 75μV as input offset voltage. For this electrical component, Through Hole is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 6.5mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 123.52dB for the time being. On the buffer amps, there are 2 channels that can be used. The operating supply voltage of the buffer op amp is rated at 12.5V. The current is quiescent at 3.25mA.
OP270GPZ Features8 Pins
supply voltage of 15V
123.52dB voltage gain
OP270GPZ ApplicationsThere are a lot of Analog Devices Inc.
OP270GPZ Instrumentational OP Amps applications.
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video computer boards
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Factory Lead Time | 8 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | OP270 |
| Pin Count | 8 |
| Operating Supply Voltage | 12.5V |
| Number of Channels | 2 |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 4mA |
| Max Supply Current | 6.5mA |
| Quiescent Current | 3.25mA |
| Slew Rate | 2.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 15nA |
| Max Input Voltage | 12.5V |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 75μV |
| Bandwidth | 5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 123.52dB |
| Power Supply Rejection Ratio (PSRR) | 116dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 50μV |
| Bias Current-Max (IIB) @25C | 0.06μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 3pF |
| Input Voltage Noise Density | 3.6nV/sqrt Hz |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP270GPZ Datasheet
+8613715157867