OPA2377AIDGKR OverviewIn the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 1mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 760μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 134dB for the time being. On the buffer amps, there are 2 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The linear amplifier is packaged by using a TR axis.
OPA2377AIDGKR Features8 Pins
supply voltage of 5V
134dB voltage gain
Output Type: Rail-to-Rail
OPA2377AIDGKR ApplicationsThere are a lot of Texas Instruments
OPA2377AIDGKR Instrumentational OP Amps applications.
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video computer boards
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Operating Temperature | -40°C~85°C |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Number of Pins | 8 |
| Part Status | Active |
| Operating Temperature | -40°C~125°C |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Fanout Buffer (Distribution) |
| JESD-609 Code | e4 |
| Voltage - Supply | 3.135V~3.465V |
| Pbfree Code | yes |
| Base Part Number | ICS85408 |
| Output | LVDS |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Number of Circuits | 1 |
| ECCN Code | EAR99 |
| Frequency (Max) | 700MHz |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Input | HCSL, LVDS, LVHSTL, LVPECL, SSTL |
| Packing Method | TR |
| Ratio - Input:Output | 1:8 |
| Terminal Position | DUAL |
| Differential - Input:Output | Yes/Yes |
| Terminal Form | GULL WING |
| RoHS Status | ROHS3 Compliant |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | OPA2377 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 760μA |
| Nominal Supply Current | 1.05mA |
| Output Current | 30mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.2V~5.5V ±1.1V~2.75V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 5.5MHz |
| Unity Gain BW-Nom | 5500 kHz |
| Voltage Gain | 134dB |
| Average Bias Current-Max (IIB) | 0.00001μA |
| Power Supply Rejection Ratio (PSRR) | 106.02dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 250μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Max I/O Voltage | 1mV |
| Input Offset Current-Max (IIO) | 0.00001μA |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| Lead Free | Lead Free |
OPA2377AIDGKR Datasheet
+8613715157867