OPA544FKTTT OverviewOp amp is packaged in TO-263-6, D2Pak (5 Leads + Tab), TO-263BA case. Op amps are Power types of amplifier on the chip. Instrumentation amplifier is delivered in a Cut Tape (CT) case. The number of terminations approaches 5. Linear amplifier has a total of 4 pins. Please take in mind that op amp should be run at 35V. Linear amplifier includes 5 pins. Regarding input offset voltage, buffer amplifier rates 5mV voltage. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~85°C. Operational amplifier can operate supply current at 12mA. The voltage gain should stay at 103dB. Instrumentation amplifier has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 35V voltage. It is used TR to pack the op amps.
OPA544FKTTT Features4 Pins
supply voltage of 35V
103dB voltage gain
OPA544FKTTT ApplicationsThere are a lot of Texas Instruments
OPA544FKTTT Instrumentational OP Amps applications.
Proportional operation circuits
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-6, D2Pak (5 Leads + Tab), TO-263BA |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Packing Method | TR |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 35V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OPA544 |
| Pin Count | 4 |
| Operating Supply Voltage | 35V |
| Number of Channels | 1 |
| Operating Supply Current | 12mA |
| Nominal Supply Current | 15mA |
| Output Current | 2A |
| Slew Rate | 8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Power |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 15pA |
| Voltage - Supply, Single/Dual (±) | 20V~70V ±10V~35V |
| Output Current per Channel | 4A |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 1.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -35V |
| Unity Gain BW-Nom | 1400 kHz |
| Voltage Gain | 103dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 28V |
| Nominal Gain Bandwidth Product | 1.4MHz |
| Max I/O Voltage | 5mV |
| Power | YES |
| Height | 4.83mm |
| Length | 10.16mm |
| Width | 8.42mm |
| Thickness | 4.58mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OPA544FKTTT Datasheet
+8613715157867