OPA547F/500 OverviewThere is a TO-263-8, D2Pak (7 Leads + Tab), TO-263CA case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 7h termination of the year. In total, there are 7 pins on this op amp ic. This linear amplifier should be powered by an 30V battery. 7 pins are located on the operational amplifiers. The input offset voltage is 5mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 10mA . It is recommended to keep the voltage gain at 115dB at all times. On the buffer amps, there are 1 channels that can be used. The operating supply voltage of the buffer op amp is rated at 30V. This linear amplifier pack is based on the TR axis.
OPA547F/500 Features7 Pins
supply voltage of 30V
115dB voltage gain
OPA547F/500 ApplicationsThere are a lot of Texas Instruments
OPA547F/500 Instrumentational OP Amps applications.
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
Factory Lead Time | 6 Weeks |
Contact Plating | Tin |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
Number of Pins | 7 |
Operating Temperature | -40°C~85°C |
Packaging | Tape & Reel (TR) |
JESD-609 Code | e3 |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 2 (1 Year) |
Number of Terminations | 7 |
ECCN Code | EAR99 |
Packing Method | TR |
Terminal Position | SINGLE |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 1 |
Supply Voltage | 30V |
Base Part Number | OPA547 |
Pin Count | 7 |
Operating Supply Voltage | 30V |
Power Supplies | +-4/+-30/8/60V |
Number of Channels | 1 |
Operating Supply Current | 10mA |
Nominal Supply Current | 15mA |
Output Current | 2A |
Slew Rate | 6V/μs |
Architecture | VOLTAGE-FEEDBACK |
Amplifier Type | General Purpose |
Common Mode Rejection Ratio | 80 dB |
Current - Input Bias | 100nA |
Voltage - Supply, Single/Dual (±) | 8V~60V ±4V~30V |
Output Current per Channel | 750mA |
Input Offset Voltage (Vos) | 5mV |
Bandwidth | 1MHz |
Neg Supply Voltage-Nom (Vsup) | -30V |
Unity Gain BW-Nom | 1000 kHz |
Voltage Gain | 115dB |
Average Bias Current-Max (IIB) | 0.5μA |
Low-Offset | NO |
Frequency Compensation | YES |
Voltage - Input Offset | 1mV |
Low-Bias | NO |
Micropower | NO |
Bias Current-Max (IIB) @25C | 0.5μA |
Programmable Power | YES |
Power | YES |
Input Offset Current-Max (IIO) | 0.05μA |
Height | 4.65mm |
Length | 10.1mm |
Width | 8.89mm |
Thickness | 4.44mm |
REACH SVHC | No SVHC |
Radiation Hardening | No |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |