P3MS650100H-4CR OverviewA clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. There is a clock generator embedded in the 4-WFDFN package. This clock generator will sustain a maximum temperature of NOT SPECIFIED when reflown. There are 4 terminations found in the file. The clock generator ic should be grounded with a voltage of 1.8V. This clock generator receives its inputs from LVCMOS, which is designed to be the clock source. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An upper frequency limit of 60MHz Max can be achieved with this clock-based frequency synthesizer. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. Approximately 2V is the maximum supply voltage needed by this time clock generator. As long as there are 1.6V~3.6V supply voltages provided, clock generator ic should work. Statistics suggest that the ambient temperature be set at -20°C~85°C, which is what is estimated by the test. There is a 4-bit clock-generating IC built specifically for microprocessors in this frequency generator. These related electrical parts are available for the base part number P3MS650100H. PLL is designed with 4 pins. The RF synthesizer features ALSO OPERATES FROM 2.3 TO 3.6V SUPPLY for improved clock signal output. 1 pins are configured for high true output enable in this clock generator. This PLL belongs to the family of 3M. The PLL BASED CLOCK DRIVER logic circuits primarily use this clock device.
P3MS650100H-4CR FeaturesAvailable in the 4-WFDFN
Supply voltage of 1.8V
1 true outputs
P3MS650100H-4CR ApplicationsThere are a lot of ON Semiconductor
P3MS650100H-4CR Clock Generators applications.
Wireless infrastructure
Instrument
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
| Factory Lead Time | 4 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-WFDFN |
| Number of Pins | 4 |
| Operating Temperature | -20°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES FROM 2.3 TO 3.6V SUPPLY |
| Voltage - Supply | 1.6V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | P3MS650100H |
| Pin Count | 4 |
| Supply Voltage-Max (Vsup) | 2V |
| Number of Circuits | 1 |
| Frequency (Max) | 60MHz |
| Family | 3M |
| Halogen Free | Halogen Free |
| Input | LVCMOS |
| Ratio - Input:Output | 1:1 |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| PLL | Yes |
| Differential - Input:Output | No/No |
| fmax-Min | 30 MHz |
| Number of True Outputs | 1 |
| Height Seated (Max) | 0.8mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
+8613715157867