P82B96DGKR OverviewTo make transportation easier, the power buffer is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Packaged in Tape & Reel (TR) and ready for power buffer.An easy-to-adapt universal mount.A Buffer, ReDriver is a typical type.For its operation, this op amp buffer uses a voltage of 2V~15V.It is important for 1 channels to work together to ensure quality output.This facilitates 2-Wire Bus input.If you want to avoid malfunction, set the operating temperature to -40°C~85°C.Application-specific operational amplifier buffers such as this one are targeted at I2C and other markets.For more pin-to-pin solutions, try "P82B96".On the op amp buffer, you will find 8 terminals.There is a peak reflow temperature of 260 for this power buffer.5V voltage provides the splitter with the power it needs to handle a wide range of demanding tasks.This power buffer has 8 pins as its pinout.As a result, it outputs in 2-Wire Bus.The 8 pins are on it.In order for this power buffer to operate, a voltage of 4mA must be applied.The receiver is 2-Bit-based.The splitter should operate at 900μA nominal supply current under normal circumstances.The spliter supports a total of 2 outputs.
P82B96DGKR Features1 channels.
Mainly used in I2C.
2-Bit receiver.
2 outputs.
P82B96DGKR ApplicationsThere are a lot of Texas Instruments
P82B96DGKR Signal Buffers, Repeaters, Splitters applications.
Digital Crossconnects
Network Switches/Routers
Backplane Interconnect
Clock Distribution
Protection Switching
Loopback
Clock Distribution
Servers
Industrial PCs
Test Equipment
Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
Factory Lead Time | 6 Weeks |
Mounting Type | Surface Mount |
Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount | YES |
Number of Pins | 8 |
Operating Temperature | -40°C~85°C |
Packaging | Tape & Reel (TR) |
JESD-609 Code | e4 |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 8 |
ECCN Code | EAR99 |
Type | Buffer, ReDriver |
Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
Applications | I2C |
Voltage - Supply | 2V~15V |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 2 |
Supply Voltage | 5V |
Terminal Pitch | 0.65mm |
Base Part Number | P82B96 |
Output | 2-Wire Bus |
Pin Count | 8 |
Number of Outputs | 2 |
Number of Channels | 1 |
Operating Supply Current | 4mA |
Nominal Supply Current | 900μA |
Propagation Delay | 5 ns |
Turn On Delay Time | 270 ns |
Input | 2-Wire Bus |
Driver Number of Bits | 2 |
Low Level Output Current | 3mA |
Receiver Number of Bits | 2 |
Interface Standard | GENERAL PURPOSE |
Data Rate (Max) | 400kHz |
Supply Voltage1-Nom | 2.5V |
Capacitance - Input | 4pF |
Height | 1.07mm |
Length | 3mm |
Width | 3mm |
Thickness | 970μm |
REACH SVHC | No SVHC |
Radiation Hardening | No |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |