PCKV857ADGG,518 OverviewThe package Tape & Reel (TR) contains it. In a 48-TFSOP (0.240, 6.10mm Width)-shaped case, it comes. The recommended mounting type is Surface Mount. As far as terminations are concerned, there are 48. Voltage is provided by the part at 2.5V. Running 260 utilizes this part's peak reflow temperature. On the device, there are 1. For normaloperation, 250MHz is the maximum frequency. When Vsup reaches 2.7V, the maximum supply voltage is reached. normally, the supply voltage (Vsup) should remain above 2.3V. Variations are made in the range of operating temperature 0°C~70°C. The component can supply a voltage of 2.3V~2.7V. The main purpose of the component is Memory, DDR, SDRAM. A total of 2003 parts have been published. Searching for information about PCKV857 starts with the base part number. A total of 48 pins are included. Logic ICs of type PLL BASED CLOCK DRIVER are used.
PCKV857ADGG,518 FeaturesMounting Type: Surface Mount
Peak Reflow Temperature (Cel): 260
Include 1 Circuits
Logic IC Type: PLL BASED CLOCK DRIVER
PCKV857ADGG,518 ApplicationsThere are a lot of NXP USA Inc.
PCKV857ADGG,518 application specific timer applications.
Wireless Access Point
Routers
Ethernet switch/router
PCI Express 2.0/3.0
Broadcast video/audio timing
Processor and FPGA clocking
Any-frequency clock conversion
MSAN/DSLAM/PON
Fibre Channel, SAN
Telecom line cards
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Voltage - Supply | 2.3V~2.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PCKV857 |
| Pin Count | 48 |
| JESD-30 Code | R-PDSO-G48 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.7V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Number of Circuits | 1 |
| Frequency (Max) | 250MHz |
| Input | SSTL-2 |
| Ratio - Input:Output | 1:10 |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| PLL | Yes |
| Differential - Input:Output | Yes/Yes |
| Main Purpose | Memory, DDR, SDRAM |
| Number of True Outputs | 10 |
| RoHS Status | ROHS3 Compliant |
PCKV857ADGG,518 Datasheet
+8613715157867