PGA205BU OverviewThe linear amplifier is packaged in a 16-SOIC (0.295, 7.50mm Width) case. This is a Instrumentation type op amp. Linear amplifier is delivered in a Tube case. The number of terminations approaches 16. Buffer amplifier has a total of 16 pins. Please take in mind that this instrumentation amplifier should be run at 15V. The buffer op amp includes 16 pins. Regarding input offset voltage, op amp rates 50μV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~85°C. This op amp can operate from a supply current at 5.2mA. Voltage gain should remain at 18.06dB. The op amp ic has 1 channels on it. This linear amplifier has a total of 3 elements. Buffer amplifier has a quiescent current of 5.2mA. Instrumentation amplifier resistance should remain within the range of 10GOhm.
PGA205BU Features16 Pins
supply voltage of 15V
18.06dB voltage gain
Resistance of 10GOhm
PGA205BU ApplicationsThere are a lot of Texas Instruments
PGA205BU Instrumentational OP Amps applications.
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | PGA205 |
| Pin Count | 16 |
| Number of Elements | 3 |
| Number of Channels | 1 |
| Operating Supply Current | 5.2mA |
| Nominal Supply Current | 5.2mA |
| Max Supply Current | 6.5mA |
| Quiescent Current | 5.2mA |
| Slew Rate | 0.7V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 500pA |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Output Current per Channel | 23mA |
| Input Offset Voltage (Vos) | 50μV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 18.06dB |
| Average Bias Current-Max (IIB) | 0.002μA |
| Voltage - Input Offset | 10μV |
| Settling Time | 28 μs |
| -3db Bandwidth | 1MHz |
| Dual Supply Voltage | 15V |
| Input Offset Current-Max (IIO) | 0.002μA |
| Input Voltage Noise Density | 15nV/sqrt Hz |
| Voltage Gain-Nom | 2 |
| Non-linearity-Max | 0.002% |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |