PGA309AIPWT Overview
The product is packaged with the materials of Cut Tape (CT).In order to save space, 16-TSSOP (0.173, 4.40mm Width) packages are used.This type of Signal Conditioner provides superior performance.Sensor and detector interface is mounted using the Surface Mount technique.To avoid unnecessary cooling processes, it is recommended that the operating temperature be kept at -40°C~125°C.The input type is Logic.In order to prevent signals from reflecting off the end of the transmission line, 16 terminations are used.Electronic parts related to this part can be found by using its base part number PGA309.A number of 1 functions have been configured.A voltage of 5V is used as the supply voltage.Electronic devices with 16-pins are used in this device.Pins on 16 components are designed to perform the specified functions.There is a mounting in the way of Surface Mount.As an output type, it uses Voltage.By maintaining the operating supply current at 1.2mA, improved efficiency can be achieved.A failure will occur if the supply voltage exceeds 5.5V.If the supply voltage is below 2.7V, failures will occur.A power supply of 5V is optimal for its operation.Data transmission is carried out via 2 channels.
PGA309AIPWT Features
With 5V channels
operate temperature at the range of 1.2mA

PGA309AIPWT Applications
There are a lot of Texas Instruments
PGA309AIPWT applications of sensor and detector interfaces.

Engine Knock Detector Signal Processing
Analog Signal Processing With Filter Characteristics
Camshaft VRS Interfaces
Crankshaft VRS Interfaces
Vehicle Speed VRS Interfaces
Automatic Lighting (Residential and Commercial)
Automation of Doors
Motion Triggered Events (Animal photography)
Position sensor
Level transmitter

Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Factory Lead Time	6 Weeks
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~125°C
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Termination	SMD/SMT
ECCN Code	EAR99
Type	Signal Conditioner
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Base Part Number	PGA309
Pin Count	16
Output Type	Voltage
Power Supplies	5V
Number of Channels	2
Interface	UART
Max Supply Voltage	5.5V
Min Supply Voltage	2.7V
Operating Supply Current	1.2mA
Nominal Supply Current	1.2mA
Input Type	Logic
Common Mode Rejection Ratio	100 dB
Number of Inputs	2
Output Current per Channel	50mA
Input Offset Voltage (Vos)	50V
Bandwidth	400 kHz
Gain Bandwidth Product	400 kHz
Input Bias Current	100pA
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
REACH SVHC	No SVHC
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free