PI3PCIE2612-AZFEX OverviewTo make transportation easier, the power buffer is packaged in a 56-WFQFN Exposed Pad.Packaged in Tape & Reel (TR) and ready for power buffer.An easy-to-adapt universal mount.A Buffer, Multiplexer is a typical type.For its operation, this op amp buffer uses a voltage of 3V~3.6V.It is important for 6 x 1:2 channels to work together to ensure quality output.If you want to avoid malfunction, set the operating temperature to -40°C~85°C.Application-specific operational amplifier buffers such as this one are targeted at DisplayPort, PCIe and other markets.For more pin-to-pin solutions, try "PI3PCIE2612".On the op amp buffer, you will find 56 terminals.3.3V voltage provides the splitter with the power it needs to handle a wide range of demanding tasks.The 56 pins are on it.A Surface Mount hole is available for mounting it on a PCB or another board.In order for this power buffer to operate, a voltage of 2.5mA must be applied.Repeters cannot be fed voltages higher than 3.6V.A minimum of 3V is required for the splitter to start.The spliter supports a total of 1 outputs.
PI3PCIE2612-AZFEX Features6 x 1:2 channels.
Mainly used in DisplayPort, PCIe.
1 outputs.
PI3PCIE2612-AZFEX ApplicationsThere are a lot of Diodes Incorporated
PI3PCIE2612-AZFEX Signal Buffers, Repeaters, Splitters applications.
Digital Crossconnects
Network Switches/Routers
Backplane Interconnect
Clock Distribution
Protection Switching
Loopback
Clock Distribution
Servers
Industrial PCs
Test Equipment
Factory Lead Time | 20 Weeks |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 56-WFQFN Exposed Pad |
Number of Pins | 56 |
Operating Temperature | -40°C~85°C |
Packaging | Tape & Reel (TR) |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 56 |
ECCN Code | EAR99 |
Type | Buffer, Multiplexer |
Applications | DisplayPort, PCIe |
HTS Code | 8542.39.00.01 |
Voltage - Supply | 3V~3.6V |
Terminal Position | QUAD |
Number of Functions | 1 |
Supply Voltage | 3.3V |
Terminal Pitch | 0.5mm |
Base Part Number | PI3PCIE2612 |
Number of Outputs | 1 |
Supply Voltage-Max (Vsup) | 3.6V |
Supply Voltage-Min (Vsup) | 3V |
Number of Channels | 6 x 1:2 |
Operating Supply Current | 2.5mA |
Output Characteristics | 3-STATE |
Output Polarity | TRUE |
Propagation Delay (tpd) | 12 ns |
Data Rate (Max) | 5Gbps |
Delay Time | 200ns |
Capacitance - Input | 3pF |
Length | 11mm |
Height Seated (Max) | 0.8mm |
Width | 5mm |
Radiation Hardening | No |
RoHS Status | ROHS3 Compliant |