RC4558IDR OverviewThere is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called General Purpose-types. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 500μV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 2.5mA . 109.54dB should be the voltage gain. Op amp ic has 2 channels. For the packing of the instrumentation amplifier, TR is adopted. There is an 2.8A quiescent current running through op amp ic.
RC4558IDR Features8 Pins
supply voltage of 15V
109.54dB voltage gain
RC4558IDR ApplicationsThere are a lot of Texas Instruments
RC4558IDR Instrumentational OP Amps applications.
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
Factory Lead Time | 6 Weeks |
Contact Plating | Gold |
Mounting Type | Surface Mount |
Package / Case | 8-SOIC (0.154, 3.90mm Width) |
Surface Mount | YES |
Number of Pins | 8 |
Operating Temperature | -40°C~85°C |
Packaging | Tape & Reel (TR) |
JESD-609 Code | e4 |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 8 |
ECCN Code | EAR99 |
Packing Method | TR |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 2 |
Supply Voltage | 15V |
Base Part Number | RC4558 |
Pin Count | 8 |
Power Supplies | +-15V |
Number of Channels | 2 |
Operating Supply Current | 2.5mA |
Nominal Supply Current | 5.6mA |
Quiescent Current | 2.8A |
Slew Rate | 1.7V/μs |
Architecture | VOLTAGE-FEEDBACK |
Amplifier Type | General Purpose |
Common Mode Rejection Ratio | 70 dB |
Current - Input Bias | 150nA |
Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
Input Offset Voltage (Vos) | 500μV |
Bandwidth | 3MHz |
Neg Supply Voltage-Nom (Vsup) | -15V |
Unity Gain BW-Nom | 3000 kHz |
Voltage Gain | 109.54dB |
Low-Offset | NO |
Frequency Compensation | YES |
Low-Bias | NO |
Micropower | NO |
Bias Current-Max (IIB) @25C | 0.5μA |
Programmable Power | NO |
Nominal Gain Bandwidth Product | 3MHz |
Max I/O Voltage | 6mV |
Power | NO |
Height | 1.75mm |
Length | 4.9mm |
Width | 3.91mm |
Thickness | 1.58mm |
REACH SVHC | No SVHC |
Radiation Hardening | No |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |