SC16C2550IA44,512 Overview
There is a cost-effective 44-LCC (J-Lead) package available for this product.The transmission of data takes place over 2, DUART channels.For packaging purposes, Tube is used.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.Configuration of this device involves 44 terminations.For its operation, it requires a supply voltage of 5V.At present, this electronic part has a status of Obsolete.Data is communicated via 2 serial I/Os.Mounting it through Surface Mount is possible.During operation, the supply voltage is set to 2.5V 3.3V 5V.Electronic devices such as this are known as 44-pin integrated circuits.There is 80MHz clock frequency measured on this IC.85°C is the maximum temperature that it can operate at.When power supplies are provided of 3.3/5V, it is reliable and efficient for electronic designers.Furthermore, it has the ability to perform ALSO OPERATES AT 2.5V MINIMUM SUPPLY as well.Basically, it uses SC16C2550 as its base part number.A minimum of -40°C is required for operation.
SC16C2550IA44,512 Features
2 serial I/Os
Clock frequency of 80MHz
Power supplies of 3.3/5V
ALSO OPERATES AT 2.5V MINIMUM SUPPLY

SC16C2550IA44,512 Applications
There are a lot of NXP USA Inc.
SC16C2550IA44,512 UARTs applications.

Battery Operated Electronics
Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules

Mounting Type	Surface Mount
Package / Case	44-LCC (J-Lead)
Surface Mount	YES
Packaging	Tube
Published	2000
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	44
Additional Feature	ALSO OPERATES AT 2.5V MINIMUM SUPPLY
HTS Code	8542.31.00.01
Voltage - Supply	2.5V 3.3V 5V
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	245
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	SC16C2550
Pin Count	44
JESD-30 Code	S-PQCC-J44
Qualification Status	Not Qualified
Operating Temperature (Max)	85°C
Operating Temperature (Min)	-40°C
Power Supplies	3.3/5V
Temperature Grade	INDUSTRIAL
Number of Channels	2, DUART
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	80MHz
Address Bus Width	3
Boundary Scan	NO
Low Power Mode	YES
External Data Bus Width	8
Data Rate (Max)	5Mbps
Number of Serial I/Os	2
Data Transfer Rate-Max	0.625 MBps
Communication Protocol	ASYNC, BIT
FIFO's	16 Byte
With False Start Bit Detection	Yes
Length	16.585mm
Height Seated (Max)	4.57mm
Width	16.585mm
RoHS Status	ROHS3 Compliant