SC16C550IA44,518 OverviewThere is a cost-effective 44-LCC (J-Lead) package available for this product.The transmission of data takes place over 1, UART channels.For packaging purposes, Tape & Reel (TR) is used.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.Configuration of this device involves 44 terminations.For its operation, it requires a supply voltage of 5V.At present, this electronic part has a status of Obsolete.Data is communicated via 1 serial I/Os.Mounting it through Surface Mount is possible.During operation, the supply voltage is set to 2.5V 3.3V 5V.Electronic devices such as this are known as 44-pin integrated circuits.There is 48MHz clock frequency measured on this IC.85°C is the maximum temperature that it can operate at.Furthermore, it has the ability to perform ALSO OPERATES AT 2.5V SUPPLY as well.Basically, it uses SC16C550 as its base part number.A minimum of -40°C is required for operation.
SC16C550IA44,518 Features1 serial I/Os
Clock frequency of 48MHz
ALSO OPERATES AT 2.5V SUPPLY
SC16C550IA44,518 ApplicationsThere are a lot of NXP USA Inc.
SC16C550IA44,518 UARTs applications.
Battery Operated Electronics
Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Additional Feature | ALSO OPERATES AT 2.5V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Voltage - Supply | 2.5V 3.3V 5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Base Part Number | SC16C550 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1, UART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 48MHz |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 3Mbps |
| Number of Serial I/Os | 1 |
| Data Transfer Rate-Max | 0.375 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 16 Byte |
| With False Start Bit Detection | Yes |
| Length | 16.51mm |
| Height Seated (Max) | 4.57mm |
| Width | 16.51mm |
| RoHS Status | ROHS3 Compliant |