SC16C754BIBM,157 OverviewThere is a cost-effective 64-LQFP package available for this product.The transmission of data takes place over 4, QUART channels.For packaging purposes, Tray is used.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.Configuration of this device involves 64 terminations.For its operation, it requires a supply voltage of 3.3V.At present, this electronic part has a status of Obsolete.Data is communicated via 4 serial I/Os.Mounting it through Surface Mount is possible.During operation, the supply voltage is set to 2.5V 3.3V 5V.Electronic devices such as this are known as 64-pin integrated circuits.There is 80MHz clock frequency measured on this IC.85°C is the maximum temperature that it can operate at.When power supplies are provided of 2.5/5V, it is reliable and efficient for electronic designers.Furthermore, it has the ability to perform ALSO OPERATES AT 2.5V OR 5V SUPPLY as well.Basically, it uses SC16C754 as its base part number.A minimum of -40°C is required for operation.
SC16C754BIBM,157 Features4 serial I/Os
Clock frequency of 80MHz
Power supplies of 2.5/5V
ALSO OPERATES AT 2.5V OR 5V SUPPLY
SC16C754BIBM,157 ApplicationsThere are a lot of NXP USA Inc.
SC16C754BIBM,157 UARTs applications.
Battery Operated Electronics
Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules
| Factory Lead Time | 7 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Packaging | Tray |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 2.5V OR 5V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Voltage - Supply | 2.5V 3.3V 5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SC16C754 |
| Pin Count | 64 |
| JESD-30 Code | S-PQFP-G64 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Power Supplies | 2.5/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 4, QUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 80MHz |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 5Mbps |
| Number of Serial I/Os | 4 |
| Data Transfer Rate-Max | 0.625 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 64 Byte |
| With Modem Control | Yes |
| Length | 7mm |
| Height Seated (Max) | 1.6mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |