SC16C852IBS,128 OverviewThere is a cost-effective 32-VFQFN Exposed Pad package available for this product.The transmission of data takes place over 2, DUART channels.For packaging purposes, Tape & Reel (TR) is used.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.Configuration of this device involves 32 terminations.For its operation, it requires a supply voltage of 2.5V.At present, this electronic part has a status of Obsolete.Data is communicated via 2 serial I/Os.Mounting it through Surface Mount is possible.During operation, the supply voltage is set to 2.5V~3.3V.Electronic devices such as this are known as 32-pin integrated circuits.There is 80MHz clock frequency measured on this IC.85°C is the maximum temperature that it can operate at.Basically, it uses SC16C852 as its base part number.A minimum of -40°C is required for operation.
SC16C852IBS,128 Features2 serial I/Os
Clock frequency of 80MHz
SC16C852IBS,128 ApplicationsThere are a lot of NXP USA Inc.
SC16C852IBS,128 UARTs applications.
Battery Operated Electronics
Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| HTS Code | 8542.31.00.01 |
| Voltage - Supply | 2.5V~3.3V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SC16C852 |
| Pin Count | 32 |
| JESD-30 Code | S-PQCC-N32 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2, DUART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 80MHz |
| Protocol | RS485 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 5Mbps |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.625 MBps |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 128 Byte |
| With False Start Bit Detection | Yes |
| Length | 5mm |
| Height Seated (Max) | 1mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
SC16C852IBS,128 Datasheet
+8613715157867