SC26C92A1A,512 Overview
There is a cost-effective 44-LCC (J-Lead) package available for this product.The transmission of data takes place over 2, DUART channels.For packaging purposes, Tube is used.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.Configuration of this device involves 44 terminations.For its operation, it requires a supply voltage of 5V.At present, this electronic part has a status of Obsolete.Data is communicated via 2 serial I/Os.Mounting it through Surface Mount is possible.During operation, the supply voltage is set to 5V.Electronic devices such as this are known as 44-pin integrated circuits.There is 8MHz clock frequency measured on this IC.There are some characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter that it possesses.85°C is the maximum temperature that it can operate at.When power supplies are provided of 5V, it is reliable and efficient for electronic designers.Basically, it uses SC26C92 as its base part number.A minimum of -40°C is required for operation.In total, there are 15 I/Os designed to transfer data.Supply currents at 25mA are considered acceptable.
SC26C92A1A,512 Features
2 serial I/Os
Clock frequency of 8MHz
Power supplies of 5V
15 I/Os

SC26C92A1A,512 Applications
There are a lot of NXP USA Inc.
SC26C92A1A,512 UARTs applications.

Battery Operated Electronics
Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules

Factory Lead Time	7 Weeks
Mounting Type	Surface Mount
Package / Case	44-LCC (J-Lead)
Surface Mount	YES
Packaging	Tube
Published	2004
JESD-609 Code	e3
Feature	Configurable GPIO, Internal Oscillator, Timer/Counter
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	44
Terminal Finish	Tin (Sn)
HTS Code	8542.31.00.01
Voltage - Supply	5V
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	245
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	SC26C92
Pin Count	44
JESD-30 Code	S-PQCC-J44
Qualification Status	Not Qualified
Operating Temperature (Max)	85°C
Operating Temperature (Min)	-40°C
Power Supplies	5V
Temperature Grade	INDUSTRIAL
Number of Channels	2, DUART
Number of I/O	15
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	8MHz
Supply Current-Max	25mA
Address Bus Width	4
Boundary Scan	NO
Low Power Mode	YES
External Data Bus Width	8
RAM (words)	0
Data Rate (Max)	1Mbps
Number of Serial I/Os	2
Data Transfer Rate-Max	0.125 MBps
Communication Protocol	ASYNC, BIT
Data Encoding/Decoding Method	NRZ
FIFO's	8 Byte
With Modem Control	Yes
Length	16.585mm
Height Seated (Max)	4.57mm
Width	16.585mm
RoHS Status	ROHS3 Compliant