SC28L201A1DGG OverviewThere is a cost-effective TSSOP package available for this product.The transmission of data takes place over 1 channels.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.Configuration of this device involves 48 terminations.For its operation, it requires a supply voltage of 5V.Data is communicated via 1 serial I/Os.Electronic devices such as this are known as 48-pin integrated circuits.There is 50MHz clock frequency measured on this IC.UART is recommended that the operating temperature does not exceed -40°C to ensure long-term, normal performance.Ideally, the operating temperature should not exceed 85°C in order to ensure long-term performance.UART is possible to ensure reliabilUARTy when the supply voltage is kept below 5.5V.When the supply voltage is kept above 3V, reliability can be ensured.In order for the device to operate efficiently, 5V is the supply voltage.
SC28L201A1DGG Features1 serial I/Os
Clock frequency of 50MHz
Operating supply voltage of 5V
SC28L201A1DGG ApplicationsThere are a lot of NXP Semiconductors / Freescale
SC28L201A1DGG UARTs applications.
Battery Operated Electronics
Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules
| Package / Case | TSSOP |
| Surface Mount | YES |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 48 |
| JESD-30 Code | R-PDSO-G48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 20mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 50MHz |
| Data Rate | 3.125 Mbps |
| Address Bus Width | 7 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 1 |
| Bus Compatibility | 68000; 80XXX |
| Data Transfer Rate-Max | 0.25 MBps |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SC28L201A1DGG Datasheet
+8613715157867