SC28L202A1DGG Overview
The package TSSOP offers the best value.Transmission is done through 2 channels.As its uP/uC/Peripheral ICs type, SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used.In its configuration, 56 terminations are used.In order to operate it, a supply voltage of 5V is required.As a means of transferring data, there are 2 serial I/Os.In this case, the electronic device is a type of integrated circuit with 56 pins.This IC measures its clock frequency at 50MHz.UART is important to keep the operating temperature below -40°C to ensure a long working period.To ensure long-term operation, the operating temperature should not exceed 85°C.UART is possible to ensure reliabilUARTy by keeping the supply voltage below 5.5V.Supply voltages above 3V can ensure reliability.Its high-efficiency operation depends on a supply voltage of 5V.Additionally, it can perform ALSO OPERATES AT 3.3V SUPPLY.
SC28L202A1DGG Features
2 serial I/Os
Clock frequency of 50MHz
Operating supply voltage of 5V
ALSO OPERATES AT 3.3V SUPPLY

SC28L202A1DGG Applications
There are a lot of NXP Semiconductors / Freescale
SC28L202A1DGG UARTs applications.

Cellular data devices
Industrial computing
Communications equipment
White goods
Battery Operated Electronics
Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets

Package / Case	TSSOP
Surface Mount	YES
JESD-609 Code	e4
Pbfree Code	yes
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	56
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Additional Feature	ALSO OPERATES AT 3.3V SUPPLY
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Pin Count	56
JESD-30 Code	R-PDSO-G56
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Temperature Grade	INDUSTRIAL
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	3V
Nominal Supply Current	20mA
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	50MHz
Data Rate	2 Mbps
Address Bus Width	7
Boundary Scan	NO
Low Power Mode	YES
External Data Bus Width	8
Number of Serial I/Os	2
Bus Compatibility	68XXX; 80XXX
Data Transfer Rate-Max	0.375 MBps
Communication Protocol	ASYNC, BIT
Data Encoding/Decoding Method	NRZ
Length	14mm
Width	6.1mm
RoHS Status	RoHS Compliant
Lead Free	Lead Free