SC28L202A1DGG,112 OverviewIn order to make it more cost-effective, this product is also available in a package of 56-TFSOP (0.240, 6.10mm Width).The transmission of information is carried out through 1, UART channels.When UART comes to packaging, Tube is adopted as the packaging method.There is an uPs/uCs/Peripheral ICs type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL which is used for it.In order to configure this device, 56 terminations are used.In order for it to operate, a voltage of 5V must be provided.At present, this electronic part is in the state of Obsolete.Data communication is supported by 2 serial I/Os.Mounting is done through Surface Mount.UART operates on a voltage of 3.3V 5V.This electronic device belongs to the 56-pin IC family.In this IC, the clock frequency is 50MHz.A few characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter can be found in it.The device is capable of operating at temperatures as high as 85°C.Providing 3.3/5V power supplies is reliable and efficient for electronic designers.Furthermore, it was shown to be capable of performing ALSO OPERATES AT 3.3V SUPPLY.There is a default setting for the base part number of the part to be SC28L202A.A minimum temperature of -40°C is required to operate it.Impact signifies that the electronic component belongs to the series.
SC28L202A1DGG,112 Features2 serial I/Os
Clock frequency of 50MHz
Power supplies of 3.3/5V
ALSO OPERATES AT 3.3V SUPPLY
SC28L202A1DGG,112 ApplicationsThere are a lot of NXP USA Inc.
SC28L202A1DGG,112 UARTs applications.
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules
Battery Operated Instruments
Multimedia Systems
Serial to Parallel/Parallel to Serial Converter
| Factory Lead Time | 7 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Packaging | Tube |
| Series | Impact |
| Published | 2003 |
| JESD-609 Code | e4 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Voltage - Supply | 3.3V 5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SC28L202A |
| Pin Count | 56 |
| JESD-30 Code | R-PDSO-G56 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1, UART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 50MHz |
| Address Bus Width | 7 |
| Protocol | RS485 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | 3.125Mbps |
| Number of Serial I/Os | 2 |
| Bus Compatibility | 68XXX; 80XXX |
| Data Transfer Rate-Max | 0.375 MBps |
| Data Encoding/Decoding Method | NRZ |
| FIFO's | 256 Byte |
| With Modem Control | Yes |
| Length | 14mm |
| Height Seated (Max) | 1.2mm |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
SC28L202A1DGG,112 Datasheet
+8613715157867