SCC2691AC1D24,518 OverviewThis product is available in a cost-effective package called 24-SOIC (0.295, 7.50mm Width).The transmission is conducted over 1, UART channels.Tape & Reel (TR) is used in terms of packaging.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used for the uPs, uCs, and peripheral ICs on the board.The configuration of this device includes 24 terminations.For its operation, a voltage of 5V is provided as the supply voltage.As of right now, this electronic part is in a Obsolete status.There are 1 serial I/Os available for communication of data.A method of mounting it is through Surface Mount.There is a voltage supply of 0 volts for the device.The electronic device is a type of integrated circuit with a pin count of 24.There is a 4MHz clock frequency for this IC.There are some characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter that are present in it.The device is capable of operating at a maximum temperature of 70°C.SCC2691A is set as the base part number for the part.A total of 1 I/Os are available for the transfer of data.2mA is the maximum supply current that is acceptable.
SCC2691AC1D24,518 Features1 serial I/Os
Clock frequency of 4MHz
1 I/Os
SCC2691AC1D24,518 ApplicationsThere are a lot of NXP USA Inc.
SCC2691AC1D24,518 UARTs applications.
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules
Battery Operated Instruments
Multimedia Systems
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| JESD-609 Code | e4 |
| Feature | Configurable GPIO, Internal Oscillator, Timer/Counter |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| HTS Code | 8542.31.00.01 |
| Voltage - Supply | 5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | SCC2691A |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1, UART |
| Number of I/O | 1 |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 4MHz |
| Supply Current-Max | 2mA |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| RAM (words) | 0 |
| Number of Serial I/Os | 1 |
| Data Transfer Rate-Max | 0.0046875 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| With Auto Flow Control | Yes |
| Length | 15.4mm |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SCC2691AC1D24,518 Datasheet
+8613715157867