SCC2691AE1N24-S Overview
There is a cost-effective PDIP package available for this product.The transmission of data takes place over 1 channels.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.Configuration of this device involves 24 terminations.For its operation, it requires a supply voltage of 5V.Data is communicated via 1 serial I/Os.Electronic devices such as this are known as 24-pin integrated circuits.There is 4MHz clock frequency measured on this IC.UART is recommended that the operating temperature does not exceed -40°C to ensure long-term, normal performance.Ideally, the operating temperature should not exceed 85°C in order to ensure long-term performance.UART is possible to ensure reliabilUARTy when the supply voltage is kept below 5.5V.When the supply voltage is kept above 4.5V, reliability can be ensured.In order for the device to operate efficiently, 5V is the supply voltage.In total, there are 1 I/Os designed to transfer data.
SCC2691AE1N24-S Features
1 serial I/Os
Clock frequency of 4MHz
Operating supply voltage of 5V
1 I/Os

SCC2691AE1N24-S Applications
There are a lot of NXP Semiconductors / Freescale
SCC2691AE1N24-S UARTs applications.

Battery Operated Electronics
Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules

Package / Case	PDIP
Surface Mount	NO
JESD-609 Code	e3
Number of Terminations	24
Terminal Finish	TIN
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Terminal Position	DUAL
Terminal Form	THROUGH-HOLE
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Supply Voltage	5V
Terminal Pitch	2.54mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Pin Count	24
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Temperature Grade	INDUSTRIAL
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Number of I/O	1
Nominal Supply Current	2.5mA
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	4MHz
Data Rate	115.2 kbps
Address Bus Width	3
Boundary Scan	NO
Low Power Mode	YES
External Data Bus Width	8
RAM (words)	0
Number of Serial I/Os	1
Data Transfer Rate-Max	0.0046875 MBps
Communication Protocol	ASYNC, BIT
Data Encoding/Decoding Method	NRZ
Height Seated (Max)	4.7mm
Width	7.62mm
RoHS Status	RoHS Compliant
Lead Free	Lead Free