SCC2692AC1N40,602 Overview
In the 40-DIP (0.600, 15.24mm) package, you can get the product at a low cost.UART is possible to transmUART on 2, DUART channels.In terms of packaging, Tube is used.The type uPs/uCs/Peripheral ICs is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.There are 40 terminations used in its configuration.To operate it, 5V is provided as the supply voltage.In the present state, this electronic part is Obsolete.In order to communicate data, there are 2 serial I/Os.Through Hole is a way to mount it.5V supply voltage is required to operate it.An IC with 40 pins is what this device is.A frequency of 3.6864MHz is measured for this IC.A few characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter can be found in it.A maximum temperature of 70°C is possible for it to operate at.When power supplies of 5V are available, it is a reliable and efficient power supply for electronic designers.In order to identify this part, its base part number is SCC2692A.A total of 15 I/Os are available for data transfer.Supply currents above 10mA are acceptable.
SCC2692AC1N40,602 Features
2 serial I/Os
Clock frequency of 3.6864MHz
Power supplies of 5V
15 I/Os

SCC2692AC1N40,602 Applications
There are a lot of NXP USA Inc.
SCC2692AC1N40,602 UARTs applications.

Industrial computing
Communications equipment
White goods
Battery Operated Electronics
Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers

Mounting Type	Through Hole
Package / Case	40-DIP (0.600, 15.24mm)
Surface Mount	NO
Packaging	Tube
Published	1994
JESD-609 Code	e3
Feature	Configurable GPIO, Internal Oscillator, Timer/Counter
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	40
Terminal Finish	Tin (Sn)
HTS Code	8542.31.00.01
Voltage - Supply	5V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Supply Voltage	5V
Terminal Pitch	2.54mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	SCC2692A
Pin Count	40
JESD-30 Code	R-PDIP-T40
Qualification Status	Not Qualified
Operating Temperature (Max)	70°C
Power Supplies	5V
Temperature Grade	COMMERCIAL
Number of Channels	2, DUART
Number of I/O	15
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	3.6864MHz
Supply Current-Max	10mA
Address Bus Width	4
Boundary Scan	NO
Low Power Mode	YES
External Data Bus Width	8
RAM (words)	0
Data Rate (Max)	1Mbps
Number of Serial I/Os	2
Data Transfer Rate-Max	0.125 MBps
Communication Protocol	ASYNC, BIT
Data Encoding/Decoding Method	NRZ
With Auto Flow Control	Yes
Length	52mm
Height Seated (Max)	4.7mm
Width	15.24mm
RoHS Status	ROHS3 Compliant