SI5350B-A-GM Overview
This clock IC is packaged using the Tray method. The 20-VFQFN Exposed Pad package includes this clock generator. In it, there are 20 terminations to be found. This time clock generator should be voltaged at 2.5V. A clock generator's input is called Crystal and it is designed as the input for this clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. A clock-based RF synthesizer that provides a max frequency of 160MHz is available. With the Surface Mount, it is easy to install this electric component on the panel. This clock PLL works with a supply voltage of 2.25V~3.63V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. A frequency synthesizer which is compatible with the LVCMOS logic levels is presented here. A Clock Generator is a classification for the electronic part in question. Microprocessors are specifically designed to use this clock-generating IC, which has a 20-bit output. This part number SI5350 is related to the following electrical components. PF synthesizers is equipped with 20 pins. PLL clock can handle a voltage of 3.3V as its supply voltage. The frequency generator has a CAN ALSO OPERATE AT 3.3V SUPPLY feature to improve the output of clock signals. There are a number of electronic parts in the MultiSynth™ series, including this one. Clock PLL has 8 signal outputs to maximi8e output frequency. For the time clock generator to operate properly, 25mA of supply current are required. An 8-element clock PLL with a low jitter performance is available on this page.
SI5350B-A-GM Features
Available in the 20-VFQFN Exposed Pad
Supply voltage of 2.5V
Operating supply voltage of 3.3V

SI5350B-A-GM Applications
There are a lot of Silicon Labs
SI5350B-A-GM Clock Generators applications.

Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards

Factory Lead Time	4 Weeks
Mounting Type	Surface Mount
Package / Case	20-VFQFN Exposed Pad
Surface Mount	YES
Number of Pins	20
Weight	42.467586mg
Operating Temperature	-40°C~85°C
Packaging	Tray
Series	MultiSynth™
Published	1997
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Type	Clock Generator
Additional Feature	CAN ALSO OPERATE AT 3.3V SUPPLY
Voltage - Supply	2.25V~3.63V
Terminal Position	QUAD
Terminal Form	NO LEAD
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Base Part Number	SI5350
Output	LVCMOS
Pin Count	20
Number of Outputs	8
Qualification Status	Not Qualified
Operating Supply Voltage	3.3V
Number of Elements	2
Number of Circuits	1
Operating Supply Current	25mA
Nominal Supply Current	40mA
Frequency (Max)	160MHz
Input	Crystal
Ratio - Input:Output	1:8
Primary Clock/Crystal Frequency-Nom	27MHz
PLL	Yes
Differential - Input:Output	No/No
Divider/Multiplier	Yes/No
Length	4mm
Height Seated (Max)	0.9mm
Width	4mm
RoHS Status	RoHS Compliant