SI8241CB-B-IS1R OverviewThe book is also accompanied by a case, which only adds to the value of the book. As a mounting type, Surface Mount is recommended for it. A 16-SOIC (0.154, 3.90mm Width) case has been embedded with it. I have a device with 2 channels attached to it. In this part, you will find Line Driver functions that you may find useful. In addition to being used in Pre-Amplifier, the device can be used in Y as well. Votage is supplied within the specified time frame. -40°C~125°C TA is the range of temperature for this device. This chip has 16 terminations, which means it has 16 terminations on it. The SI824 family of parts can be found by searching for a part number that is similar to it. In order to better understand the specifications of the device, please refer to the following details: Class D. As far as the 16 pins on the chip are concerned, they are accessible. It is possible to sort the consumer IC type of a part using AUDIO AMPLIFIER. It is important that the minimum supply voltage (Vsup) for this part is greater than 4.5V. Max supply voltage (Vsup) reaches 5.5V.
SI8241CB-B-IS1R FeaturesWith 16-SOIC (0.154, 3.90mm Width) channels
operate temperature at the range of -40°C~125°C TA
consumer IC type: AUDIO AMPLIFIER
SI8241CB-B-IS1R ApplicationsThere are a lot of Silicon Labs
SI8241CB-B-IS1R Audio Special Purpose applications.
Replacement of DIR1703
Other Applications Requiring S/PDIF Receiver
Audio Differential Line Drivers
Audio Mix Consoles
Distribution Amplifiers
Graphic and P arametric Equalizers
Dynamic Range Processors
Digital Effects Processors
Telecom Systems
Hi-Fi Equipment
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Applications | Pre-Amplifier |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | SI824 |
| Function | Line Driver |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 2 |
| Interface | Analog |
| Specifications | Class D |
| Consumer IC Type | AUDIO AMPLIFIER |
| Length | 9.9mm |
| Height Seated (Max) | 1.75mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Package / Case | 6-SMD, No Lead |
| Supplier Device Package | 16-SOIC |
| Package | Tape & Reel (TR) |
| Base Product Number | SIT9375 |
| Mfr | SiTime |
| Product Status | Active |
| Height - Seated (Max) | 0.035 (0.90mm) |
| Operating Temperature | -40°C ~ 105°C |
| Series | SiT9375 |
| Size / Dimension | 0.098 L x 0.079 W (2.50mm x 2.00mm) |
| Type | XO (Standard) |
| Voltage - Supply | 3.3V |
| Frequency | 161.132813 MHz |
| Frequency Stability | ±50ppm |
| Output | LVPECL |
| Function | Enable/Disable |
| Base Resonator | MEMS |
| Current - Supply (Max) | 42.5mA |
| Current - Supply (Disable) (Max) | - |
| Spread Spectrum Bandwidth | - |
| Absolute Pull Range (APR) | - |
| Ratings | - |