SL23EP08SC-1HT Overview
Clock ICs are packaged using the Tape & Reel (TR) method. In the 16-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. A maximum temperature of NOT SPECIFIED can be sustained by this clock generator ic during reflowing. There are a total of 16 terminations in this file. A voltage of 2.5V should be applied to this electronic frequency generator. In this case, Clock is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 220MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There is a maximum voltage of 2.7V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 2.3V is recommended for safety reasons. There are 2.3V~3.6V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. There are several logic levels in LVCMOS logic that can be used with this clock generator. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. The related electrical components for the base part number SL23EP08 can be found below. A 16 pin is available on the clock PLL. With ALSO OPERATES WITH 3.3V SUPPLY, this clock generator produces better clock signals. The output frequency is magnified as high as possible with 8 signal outputs. The timing skew of this frequency synthesizer is low at 0.5 nsmax.
SL23EP08SC-1HT Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V

SL23EP08SC-1HT Applications
There are a lot of Silicon Labs
SL23EP08SC-1HT Clock Generators applications.

Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel

Factory Lead Time	6 Weeks
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Weight	50.008559mg
Operating Temperature	0°C~70°C
Packaging	Tape & Reel (TR)
Published	2011
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Additional Feature	ALSO OPERATES WITH 3.3V SUPPLY
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	2
Supply Voltage	2.5V
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	SL23EP08
Output	LVCMOS
Pin Count	16
Number of Outputs	8
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	2.7V
Supply Voltage-Min (Vsup)	2.3V
Number of Circuits	1
Frequency (Max)	220MHz
Input	Clock
Ratio - Input:Output	1:9
PLL	Yes with Bypass
Differential - Input:Output	No/No
Divider/Multiplier	Yes/Yes
fmax-Min	220 MHz
Same Edge Skew-Max (tskwd)	0.5 ns
RoHS Status	RoHS Compliant