SN65LV1224BRHBTG4 Overview
A Tape and Reel case is used for the delivery of this product.A VQFN EP case is used to package this product.Serializer/Deserializer is necessary to operate the 2 inputs.There is a LINE RECEIVER interface IC type for the part.There are a total of 32 terminations on it.There are 32 pins on the chip that are available for use.Serializer/Deserializer can handle the voltage 3.3V as a power supply.Listed as 3.3V volts, the operating supply voltage is for the chip.There is a maximum supply current of 95mA in this device.The receivers in it are 10 receivers.This part's minimum operating temperature must not be less than -40°C degrees Celsius.There must be a temperature difference below 85°C during the operation.There is an embedded 1 driver on the part that controls the device.There are a total of 32 pins on the chip.
SN65LV1224BRHBTG4 Features
Available in VQFN EP Package / Case
Interface IC Type : LINE RECEIVER
Number of Receivers: 10
With 1 Drivers

SN65LV1224BRHBTG4 Applications
There are a lot of Texas Instruments
SN65LV1224BRHBTG4 serializers and deserializers applications.

Relay Driver
Digital Clock, Thermometer, Counter, Voltmeter
Instrumentation Readouts
Instrumentation
Test Equipment
Hand Held Instruments
Bargraph Dlsplays
Numerlc and Non-Numerlc Panel Dlsplays
High and Low Temperature Envlronment s where LCD
Dlsplay Integrtty ls Compromissd

Package / Case	VQFN EP
Surface Mount	YES
Number of Pins	32
Weight	71.809342mg
Packaging	Tape and Reel
JESD-609 Code	e4
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	32
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Pin Count	32
Operating Supply Voltage	3.3V
Temperature Grade	INDUSTRIAL
Max Supply Voltage	3.6V
Min Supply Voltage	3V
Power Dissipation-Max	2.85W
Power Dissipation	2.85W
Supply Current-Max	95mA
Data Rate	660 Mbps
Number of Inputs	2
Output Characteristics	DIFFERENTIAL
Differential Output	NO
Output Polarity	COMPLEMENTARY
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Interface IC Type	LINE RECEIVER
Interface Standard	GENERAL PURPOSE
Number of Drivers	1
Supply Voltage1-Nom	3.3V
Number of Receivers	10
Height	900μm
Length	5mm
Width	5mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free