SN65LVP19DRFT Overview
To make transportation easier, the power buffer is packaged in a 8-WFDFN Exposed Pad.Packaged in Tape & Reel (TR) and ready for power buffer.An easy-to-adapt universal mount.A Buffer, ReDriver is a typical type.For its operation, this op amp buffer uses a voltage of 2.375V~3.6V.This facilitates PECL input.If you want to avoid malfunction, set the operating temperature to -40°C~85°C.For more pin-to-pin solutions, try "65LVP19".On the op amp buffer, you will find 8 terminals.There is a peak reflow temperature of 260 for this power buffer.2.5V voltage provides the splitter with the power it needs to handle a wide range of demanding tasks.This power buffer has 8 pins as its pinout.As a result, it outputs in LVPECL.The 8 pins are on it.A Surface Mount hole is available for mounting it on a PCB or another board.In order for this power buffer to operate, a voltage of 36mA must be applied.Power supplies from 2.5/3.3V are sufficient for the repeters to run.In the most extreme case, this splitter dissipates 161mW watts.The splitter should operate at 30mA nominal supply current under normal circumstances.A 1 receiver is implemented in this repeater signal.The spliter's current output is 400μA.
SN65LVP19DRFT Features

SN65LVP19DRFT Applications
There are a lot of Texas Instruments
SN65LVP19DRFT Signal Buffers, Repeaters, Splitters applications.

Digital Crossconnects
Network Switches/Routers
Backplane Interconnect
Clock Distribution
Protection Switching
Loopback
Clock Distribution
Servers
Industrial PCs
Test Equipment

Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-WFDFN Exposed Pad
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Type	Buffer, ReDriver
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation	161mW
Voltage - Supply	2.375V~3.6V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Base Part Number	65LVP19
Output	LVPECL
Pin Count	8
Power Supplies	2.5/3.3V
Operating Supply Current	36mA
Nominal Supply Current	30mA
Output Current	400μA
Number of Bits	1
Propagation Delay	340 ps
Logic Function	Buffer
Input	PECL
Data Rate (Max)	2Gbps
Number of Receivers	1
Delay Time	460ps
Delay-Max	0.63 ns
Height	800μm
Length	2mm
Width	2mm
Thickness	750μm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free