SN74GTLP2033GQLR OverviewIn packaging, Cut Tape (CT) is used.In the 56-VFBGA package, it can be found.It is essential that the device be able to operate normally by supplying a voltage of 3.15V~3.45V.Electronic parts mounted using the Surface Mount method.This device operates at a temperature of -40°C~85°C.Approximately 8 bits of information can be stored in the memory.Electronic parts belonging to the 74GTLP series share a number of characteristics.Parts related to the base part number 74GTLP2033 can be found.It adds up to 56 when all component pins are added together.Using 56 terminations prevents signals from reflecting off the transmission line.This is mounted using the Surface Mount method.It is constructed with 56 pins.It is possible to keep normal use when the minimum supply voltage is set to 3.15V.It is possible to maintain normal operation when the maximum supply voltage is set to 3.45V.For convenient use, the power supplies of 3.3V should be maintained.It has 2 ports.Packing is handled by TAPE AND REEL.As its control type, INDEPENDENT CONTROL works.175MHz is the frequency of operation.It has 1 circuits configured.
SN74GTLP2033GQLR FeaturesSN74GTLP2033GQLR ApplicationsThere are a lot of Texas Instruments
SN74GTLP2033GQLR Specialty Logic ICs applications.
Remote controls
Wireless network systems
Satellite communications networks
Ethernet circuitry
Wired telephone
Cordless telephone
Desktop PC
Notebook
Pocket PC
Desktop radio
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Weight | 58.796911mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74GTLP |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Packing Method | TAPE AND REEL |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.15V~3.45V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Frequency | 175MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74GTLP2033 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8.8 ns |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | OPEN-DRAIN/3-STATE |
| Logic Type | LVTTL-TO-GTLP Adjustable-Edge-Rate Registered Transceiver |
| Prop. Delay@Nom-Sup | 7.4 ns |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | -24mA |
| Low Level Output Current | 100mA |
| Control Type | INDEPENDENT CONTROL |
| Translation | GTL/P & LVTTL |
| Length | 7mm |
| Width | 4.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74GTLP2033GQLR Datasheet
+8613715157867