ST16C1551IQ48-F OverviewThere is a cost-effective TQFP package available for this product.The transmission of data takes place over -- channels.For packaging purposes, Tray is used.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.Configuration of this device involves 48 terminations.For its operation, it requires a supply voltage of 5V.At present, this electronic part has a status of Obsolete.Data is communicated via 1 serial I/Os.Mounting it through Surface Mount is possible.During operation, the supply voltage is set to --.Electronic devices such as this are known as 48-pin integrated circuits.There is 24MHz clock frequency measured on this IC.The mount is done using Surface Mount.85°C is the maximum temperature that it can operate at.When power supplies are provided of 3.3/5V, it is reliable and efficient for electronic designers.A minimum of -40°C is required for operation.In order to maintain normal operation, it is necessary to keep the supply voltage below 5.5V.A supply voltage greater than 2.97V ensures normal operation.Universal asynchronous receiver-transmitter is classified as a -- series electronic component.
ST16C1551IQ48-F Features1 serial I/Os
Clock frequency of 24MHz
Power supplies of 3.3/5V
ST16C1551IQ48-F ApplicationsThere are a lot of Exar Corporation
ST16C1551IQ48-F UARTs applications.
Battery Operated Electronics
Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules
| Mount | Surface Mount |
| Package / Case | TQFP |
| Mounting Type | Surface Mount |
| Supplier Device Package | 48-TQFP (7x7) |
| Series | -- |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | -- |
| Number of Terminations | 48 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Voltage - Supply | -- |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 48 |
| JESD-30 Code | S-PQFP-G48 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Channels | -- |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 24MHz |
| Address Bus Width | 3 |
| Protocol | -- |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 8 |
| Data Rate (Max) | -- |
| Number of Serial I/Os | 1 |
| Data Transfer Rate-Max | 0.1875 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| With False Start Bit Detection | -- |
| Features | -- |
| With Modem Control | -- |
| With Auto Flow Control | -- |
| With IrDA Encoder/Decoder | -- |
| Length | 7mm |
| Height Seated (Max) | 1.2mm |
| Width | 7mm |
| RoHS Status | RoHS Compliant |
+8613715157867