STA333W13TR Overview
There is also an accompanying case included with this set. There is a recommendation that it should be mounted with a Surface Mount type mount. The file is embedded in a 36-BFSOP (0.295, 7.50mm Width) Exposed Pad case. This device has 2 channels. For your reference, here are some Fully Integrated Processor functions. It can be used in Pre-Amplifier. There is a supply of votage within 4.5V~20V. 0°C~70°C TA is the temperature range for this device. A chip has 36 terminations. You can find similar parts by searching for the STA333 family. Refer to the following specifications for the device: Direct Digital Amplification. Chips have 36 pins that can be accessed. It is possible to sort parts based on their consumer IC type using CONSUMER CIRCUIT. It should not be possible to power this part with a voltage lower than 4.5V (Vsup). Voltage can be generated at 3.318V volts with this device. A maximum supply voltage (Vsup) is reached at 18V. In this case, Surface Mount mounts it. This electrical component represents the Sound Terminal™ series. Maintain 48 dB as the voltage gain. 30mA is its supply current.
STA333W13TR Features
With 36-BFSOP (0.295, 7.50mm Width) Exposed Pad channels
operate temperature at the range of 0°C~70°C TA
consumer IC type: CONSUMER CIRCUIT
operate supply current at 30mA

STA333W13TR Applications
There are a lot of STMicroelectronics
STA333W13TR Audio Special Purpose applications.

AV/DVD Receiver, AV Amplifier
Car or Mobile Audio System
Digital Television
Musical Instruments
Recording Systems
High-End Audio/Sound Card for PC
Replacement of DIR1703
Other Applications Requiring S/PDIF Receiver
Audio Differential Line Drivers
Audio Mix Consoles

Lifecycle Status	ACTIVE (Last Updated: 7 months ago)
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	36-BFSOP (0.295, 7.50mm Width) Exposed Pad
Number of Pins	36
Operating Temperature	0°C~70°C TA
Packaging	Tape & Reel (TR)
Series	Sound Terminal™
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	36
Applications	Pre-Amplifier
Voltage - Supply	4.5V~20V
Terminal Position	DUAL
Terminal Form	GULL WING
Base Part Number	STA333
Function	Fully Integrated Processor
Supply Voltage-Max (Vsup)	18V
Power Supplies	3.318V
Supply Voltage-Min (Vsup)	4.5V
Number of Channels	2
Interface	I2C, I2S
Operating Supply Current	30mA
Output Power	20W
Specifications	Direct Digital Amplification
Gain	48 dB
Consumer IC Type	CONSUMER CIRCUIT
Length	10.5mm
Width	7.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free