STAC9200X5TAEB1X Overview
As a space saver, it comes in the TQFP package. In the various applications in which this electronic part is used, it is capable of delivering a high level of efficiency as a type of General Purpose. The device has a 48-pin configuration. Using Surface Mount technology, it is mounted to a PCB. Maintain a maximum voltage of 3.465V. Analog signals are converted into digital signals by A/D converters. Maintaining a minimum voltage of 3.135V is recommended. Powered by a 3.3V supply voltage, it can run. As a safeguard against overheating, the operating temperature is set to a maximum of 70°C. Temperatures above 0°C are set as the minimum to prevent malfunctions. An average current of 50mA will flow through a circuit at any given time.
STAC9200X5TAEB1X Features
Embedded in the TQFP package
2 A/D converters

STAC9200X5TAEB1X Applications
There are a lot of Integrated Device Technology (IDT)
STAC9200X5TAEB1X CODECs Interface ICs applications.

Cut-to-length
Filling
Food & beverage
Linear measurement
Material handling
Metal forming & fabrication
Mobile equipement
Motor feedback
Packaging
Printing

Mount	Surface Mount
Package / Case	TQFP
Number of Pins	48
Published	2004
JESD-609 Code	e3
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Type	General Purpose
Terminal Finish	Matte Tin (Sn) - annealed
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Operating Supply Voltage	3.3V
Max Supply Voltage	3.465V
Min Supply Voltage	3.135V
Nominal Supply Current	50mA
Resolution	3 B
Sampling Rate	192 ksps
Number of A/D Converters	2
Signal to Noise Ratio (SNR)	100 dB
Length	7mm
Width	7mm
Thickness	1.4mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free